For Item #909745
Display Stand for Fused Glass
Wire hoop can be bent to make size adjustment.
The smaller the stand the harder to bend, the larger the stand the easier to bend.
Wow - These stands can hold rectangles and squares - we bent the frame out to hold these 12" pieces.
Below is another way to shim inside the clip. The glue we suggest is a rubber style glue like silicone, RTV or E6000. They will give a softened cushy support. Height of the shim can be precisely controlled by trimming out any glue glue with a knife. Shim the bottom two clips and the sides if you choose.
|1) Wrap clip with painters tape because it removes easily
2) Fill cavity with E6000 Glue
3) Dry according to glue directions
4) Trim glue to proper height with a knife
E6000 Glue - Great glue for glass to glass. Also Great for gluing metal jewelry findings to fused glass, like barrettes or pins. Has a rubber constancy. Feels and works like Clear RTV (silicone rubber).
| .18Fl. Oz. #E600018
Buy one pay $2.00
Buy 12 or more pay $1.65
Click Here to see more stands like this