Order NowOrder Now
Register Account | Login
View Account | Logout

Print version of this page

Red Max Torch


Red max torch for glass lamp workers, bead makers, flame workers, glass blowers, and marble makers

Red Max Torch With Pre Mix Top Torch The Red Max Torch With Pre Mix Top Torch
Red Max Torch With Surface Mix Top Torch Red Max Torch With Surface Mix Top Torch

The Red Max Torch

- A torch for both small and large work. This torch is really two torches in one with two independent sets of valves. The large flame torch is surface mix. The top torch can be either surface mix or pre mix. You decide. Same price for either configeration. Two completely different sets of oxygen and gas valves allow you to control each flame independent of each other. The large flame tip is a 44 port surface mix round shaped flame.
To Watch A Real Player Video of this Torch Click Here

Choose your torch - Same Price
Red Max Torch Surface Mix Red Max Torch - A Minor Bench Burner (minus the heat sink) is mounted on top of the torch. Because the top torch is a surface mix, you can work any type of glass, both soft glass (Moretti/Effetre) or hard glass (Pyrex/borasilica). 16035
$499
                                 Or 
Red Max Torch Surface Mix Red Max Torch - A Mega Minor Bench Burner (minus the heat sink) is mounted on top of the torch. Because the top torch is a surface mix, you can work any type of glass, both soft glass (Moretti/Effetre) or hard glass (Pyrex/borosilicate). The Mega Minor has a slightly larger flame than the Minor Burner. 16038
$549
Or
Red Max Torch

Pre Mix Red Max Torch -  Many artists believe a pre-mix works better for borosilicate (Pyrex) glass. You CAN NOT work with Soft (Moretti/Effetre) glass with this torch. A pre-mix torch allows you to change the top torch tip, anything from a small single hole tip to a multiple hose tip. Two tips are included with this torch. See more tips below. 16036

$499

Red Max Torch

Item#  
red rocket torch mounted marvering pad Torch Mounted Marvering Pad
Puts a graphite marvering pad in your work area close to the flame. Very sturdy.
Lifetime Sundance Warranty.
Made in the USA
#1401      $46                        
red rocket torch mounted marvering pad red rocket torch mounted marvering pad red rocket torch mounted marvering pad
This Torch Mounted Marvering Pad fits on 9 different torches:
Midrange - all 3 styles
Major Burner - all 3 styles
Red Max - all 3 styles
You need the following equipment to use this torch:
  • Oxygen Regulator - Prices are below
  • Propane Regulator - Prices are below
  • Hose - Prices below details and setup
  • Oxygen and Propane Tanks - details
Click here to see a video comparing this torch with the Major burner.
Watch the video comparing the Red Max Torch with the Major burner

TIPS for the National 8M Torch
These single hole TIPS work with the National 8M Torch.
The PA11 adaptor is also needed.
Tips for the National 8M Torch: OX-1, OX-2, OX-3, OX-4, OX-5 Single Orifice / One Holed Pre-Mix Tips
Single Orifice - Pre-Mix Tips
Tips for the National 8M Torch HTM-0, HTM-1, HTM-2, HTM-3, HTC-0, HTC-1, HTC-2, HTC-3 Multiple Orifice/Multiple Hole Torch Tip
Multiple Orifice - Pre-Mix Tips
If these tips are to be used with the 8M torch, a PA-11 adaptor is required. It is shown up the page.

Volume Discount for Torch Tips
By purchasing multiple tips in group tipdiscount you
can receive up to 25% your purchase.

If your purchase exceeds $60 put in coupon code TORCHTIPS1 to receive a 10% discount.
If your purchase exceeds $90 add coupon code TORCHTIPS2 to receive an additional 10% for total of 20% discount.
If your total purchase exceeds $120.00 enter the first two coupons plus this coupon TORCHTIPS3 and you will receive an additional discount of 5% for a total of 25% Discount

Order #

 Description this group of tips qualifies for tipdiscount Price
  OX-00 One Hole -.020 Smallest size $22
  OX-0 One Hole .032 $21
  OX-1 One hole  .042 $17
  OX-2 One Hole  .055 $14
  OX-3 One Hole .07 $14
  OX-4 One Hole .082 $14
  OX-5 One Hole - Largest size .1 $12

Order #

 Description this group of tips qualifies for tipdiscount Price
 HTM-0  7 holes - each .04 inch diameter holes $39
 HTM-1  9 holes - each .04 inch diameter holes $39
 HTM-2  9 holes - each .048 inch diameter holes $39
 HTM-03  9 holes - each .055 inch diameter holes $39

Order #

 Description this group of tips qualifies for tipdiscount Price
 HTC-0  7 holes - Silent Burn $41
 HTC-1  12 holes - Silent Burn $44
 HTC-2  19 holes - Silent Burn $49
 HTC-3  31 holes - Silent Burn click here to see the HT3 tip fired up $55
CAUTION - all tips are subject to burning out if you have an improper torch adjustment. The HT-2 and HT-3 are the most sensitive tips to burning out and these are not recommended for beginners who are learning how to adjust their torches properly - therefore these and all tips are not guaranteed from burning out. Please see the person who instructed you to learn the proper torch adjustment.


Gas Equipment

for lampworkers, Glass Beadmakers and Glassblowers


Oxygen Concentrator Click Here to see our Oxygen Concentrators (Oxygen Generators)

Gas Regulators

Two regulators are required when you use a two gas, (oxygen and propane) torch. They fit between the gas tanks and the gas hose. None are needed if you are using the Hot Head torch. Oxygen Regulator is not needed if you are using an Oxygen Concentrator.

Item# Description Price
regulator-oxygen-lampworking-glass-beadmaking-glassblowing OXYGEN REGULATOR
Two gauge. One Stage - Click Here for information about regulators, about OUR regulators and warranty.

Inlet CGA 540. Outlet male "B" fitting.

Order Number REB93 		$69.00
regulator-fuel-lampworking-glass-beadmaking-glassblowing FUEL GAS REGULATOR - Propane, Propylene, or Acetylene
Two gauge. One Stage -  Click here for information about regulators, about OUR regulators and warranty.

Inlet CGA 510. Outlet male "B" fitting.

Order Number REB11 		$69

The fastest way to order any of these items is to call us toll free at 1-888-4HOTGLASS.

Gas Hoses

Gas Twin Hose SetUse this hose when you use a two gas torch (oxygen and propane) like a Minor Burner. To attach torch, push the cut ends onto the torch and secure with a hose clamp. These hoses have two attached hoses, one for oxygen and one for propane. The brass end of the hoses are attached to the gas regulators. Propane hose fittings are left handed threads and colored red and oxygen is right handed and colored green - This prevents a mix-up when attaching hoses.

CAUTION Do not use the easy to find oxygen/acetylene type hoses. The propane gas will rot them. The hoses we sell are made for all types of gas including propane. Hose ends have female brass fittings.

Item# Length Ends of hose - hose diameter Price
T124 12 ft (3.7 meters) Female "B" fitting one side and cut end of hose other side
1/4" diameter hose		 $22
T254 25 ft (7.7 meters) Female "B" fitting on both ends
1/4" diameter hose		 $34

The below larger diameter hose is only used if when you need a large hose to fit over the large inlet fittings on some torches. (You can get the smaller 1/4" hose listed above on these large inlet fittings with a bit of effort. A trick is to immerse the end of the hose in very hot water to soften the end.)

Order #

 Length Ends of hose - hose diameter Price
T128 12 ft (3.7 meters) Female "B" fitting one side and cut end of hose other side
3/8" diameter hose		 $29.50
T258 25 ft (7.7 meters) Female "B" fitting on both ends
3/8" diameter hose		 $52.00

The fastest way to order any of these items is to call us toll free at 1-888-4HOTGLASS

Y - Connectors for Hose

Gas Y ConnectorsY Connector - Connect this fitting at the output of the regulator and attach two hoses so you can use two torches from the same tank. Oxygen and propane Y are packaged and priced separately.

Y Connector with valves - Same as the Y connector described above except has two on/off valves, one for each hose.
Item# Description Output end is a Input end is a Price
101 Y hose connector (oxygen) hose (B fitting) Oxygen regulator $19.50
102 Y hose connector (propane) hose (B fitting) Propane regulator $19.50
101V Y hose connector with valve (Oxygen) hose (B fitting) Oxygen regulator $32.50
102V Y hose connector with valve (Propane) hose (B fitting) Propane regulator $32.50

* The FA30 connects between the regulator and the gas hose and is more commonly used.

Flashback Arrestors

Flashback ArrestorsIn some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion.

This device helps prevent this reverse gas flow and flashback by using a reverse flow check valve and a flame arrestor.

Packaged and priced with both an oxygen and a propane arrestor.


Item# Description Output end is a Input end is a Price
  Flashback arrestors (pair of oxygen and fuel gas) Connects directly to the fittings on a torch like the 3AB, 8M and Carlisle. We also include the fitting so you can put this arrestor in the middle of your twin hose. A good place to put this arrestor is a couple feet away from the torch. If you cut the hose you will not have fittings on the ends. Then must order one or two pair of A2 fittings for $5.00 to connect to arrestor. FA10

Female B size hose fitting

Male B size fitting using the included adaptor

 Male B size hose fitting $54.00
  Flashback arrestors (pair of oxygen and fuel gas) Connects directly on the regulator. Item #FA30 Male B size gas hose fitting Female B size gas hose fitting $54.00
hose fittings Insert into cut end of hose and secure with included hose clamp. Check for leaks. Item #A214 One side Female B size hose fitting Other side a barb that fits in a 1/4" ID gas hose - use a hose clamp $5.00
hose fittings Insert into cut end of hose and secure with included hose clamp. Check for leaks. Item #A338 One side Female B size hose fitting Other side a barb that fits in a 3/8" ID gas hose - use a hose clamp $5.00
  Oxygen and Fuel Gas Fittings - The pieces in the picture labeled "included". A pair of these are included in the FA10. If you need extra pieces order the A30 and A31 parts.
A30 ox
A31 fuel		 Male B size gas hose fitting Male B size gas hose fitting A30 $1.50 each

A31 $1.50 ea

Note: Flashback arrestors have an arrow stamped on it to indicate the gas flow direction.
Works in only one direction.
 
  A2 optional, not always need and are not included.

* The FA30 connects between the regulator and the gas hose and is more commonly used. Requires B size fittings on hose.

ALL IN ONE - 4 in 1



Combination Flashback Arrestor and Quick-Connect - Item# QDF30 - $79.00

Four Functions in a single item. Shorter and less expensive than if purchased separately.
  • A flashback arrestor
  • A quick connect and disconnect
  • An automatic shutoff valve
  • An internal reverse flow check valve all

Hose Quick Connects

Makes an easy job out of disconnecting and reconnecting your torch.

Disconnect your torch switching to a different torch or to put it away for safe keeping.

Great for quick classroom set up and take down.

Item# Description Input end is a Output end is a Price
QDB10 Quick Connects (pair) Male B gas hose fitting Female B fitting $49
QDB20 Quick Connects (pair) Hose to Hose Hose to Hose $49
QDB30 Quick Connects (pair) Regulator Male B hose fitting $49

Manifold Gas System

Gas ManifoldConnect up to six torches to the same gas supply with this manifold system. Included are enough fittings and plugs to make 2 to 6 hose connections. Two manifolds are required, one for oxygen and one for propane. All Brass.

Custom Manifold Systems:
We can help you figure out which parts you would need for your system and pre assemble for no extra charge. Systems might also include quick connects and flashback arrestors. Place an order

Item# Description Price
M6 Manifolds system, Includes 1 block, 7 fittings and 4 plugs - two required - specify Oxygen or Propane $57.50


Item# Description Price
MB7 Manifold block only, works with oxygen or gas $39.00
32 Extra Fitting - one side fits in the manifold block, other side fits a standard right handed thread oxygen "B" size hose fitting. $1.50
33 Extra Fitting - one side fits in the manifold block, other side fits a standard left handed thread gas "B" size hose fitting. Gas fittings have a "line notch" stamped into the nut part of the fitting to identify it as left handed threading. $1.50
P41P Extra Plug - plugs unused outlets in the manifold block $2.00

Manifold setup for 3 torches.

Spark Lighter

Use to light torches. Squeeze the handles together to cause a spark. Place an order
Order# Description Price
1501 Used to light torches. Squeeze the handles together to cause a spark. $3.00
 Click here to see our foot pedals
hose adaptor set for torches

Work Surfaces

for
Torch Lampworking, Glassblowing and
Glass Beadmaking



Work Surfaces

Protect your work table. A comfortable pair of padded foam armrests and worksurface and rod rest all in one! All stainless steel. Pictured with a Minor Burner not included.

Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
Size   Description  Price
 Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12"x 13"		 Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. $16
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"		 Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.  May need to be sent in it's own box. $24
work surface for lampworking glass beadmaking blassblowing #1636
17" x 18"		 Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.  May need to be sent in it's own box. $29
work-surface-1649sm-torch-lampworking-glassblowing #1655
16"x 28"		 Stainless Steel work surface - actually 16" x 28" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. $45
worksurface for torch lampworking #1643
14"x 28"		 Stainless Steel work surface with Arm rests and built on rod rest - 14" x 28" flat area. (Actually a bit smaller so we can fit it in a standard box.) PLUS if this is shipped, it must go in it's own box. $55

Accessories pictured not included.
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.


Item# Description  Price
  #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench $5.00



  #RRT9 - 9" Rod rest - fits inside 10" kilns or on your workbench $6.00



glass rod rest for torch lampworking and glassblowing #RRT8T - 8" Rod rest - Extra Tall for easy Grabbing - see below $7.00



glass rod rest for torch lampworking and glassblowing #RRT9T - 9" Rod rest - Extra Tall for easy Grabbing - see below $8.00

  #RRT12T - 12" Rod rest - Extra Tall for easy Grabbing - see below $10.00
glass rod rest for torch lampworking and glassblowing #RRT17T - 17" Rod rest - Extra Tall for easy Grabbing - see below $14.00
glass-rod-rest-lampworking
Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap





Shopping Cart



Check this out!


Make Glow in the Dark Glass Beads
with this NEW Glow Rod!

Specials!
New Stuff And Sales!


Classes
  • Beginning Glass Fusing 1101
     $379
    June 22nd, 23rd & 24th
    details
  • Jewelry Wire Wrapping Class and Workshop
    $95
    Two day class
    To Be Scheduled
    details
  • Jewelry Fusing 1107
    $255
    To Be Scheduled
    details
  • Intermediate/Advanced
    Glass Fusing 1102
    $465
    Three day class
    To Be Scheduled
    details
  • Glassblowing 2110
    with a Torch
    $325
    To Be Scheduled
    details
  • Welding and Metalmaking 1109
    for display stands
    or any metal art - $365
    To Be Scheduled
    details
  • Sandcarving Glass Class 3111
    for Glass Fusing or
    Any Etch Art - $550
    To Be Scheduled
    details
  • Glass Beadmaking 2101
    Beadmaking with a Torch
    Learn to make beads!
    $265
    To Be Scheduled
    details

New Items
 

Sales
 

 
Home | About Us | Store Locater | Wholesale Qualifications | Instructor Info
Order | Employment Opportunities | Contact Us | Sitemap


Copyright © 2011 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021  |  Fax: 530.876.8561