Order Now
Kit #12
Professional Flameworkers Kit
for making glass beads, marbles, vessels & sculptures
with Major Burner Torch
(or subsitute any torch with price adjustment)
This kit uses the two gas (oxygen and propane) Major Bench Burner by Nortel.
Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Click here to find out more about gas tanks. It costs about $1 to $2 per hour to run the Major Burner torch.
Use this kit when you want to be assured that you have the most complete set of tools for the professional beadmaker. This equipment can also be used buttons, marbles, vessels and sculptures.
(What you get is what is on the list below - the pictures may not be updated)
Kit #12 Includes:
-
Torch an Gas Equipment
-
Tools
- Hot Glass Shears
- Enhanced Didymium Glasses - high quality enhanced didymium lens! - the real thing! watch out other web sites are not selling the real didymium in their kits - but some inexpensive "welding" type glasses which do not do what true didymiums do. This is one of the few things we can upgrade in this kit. Up grade to clip ons, large frames, cool looking frames or to add additional protection for working with borosilicate glass or other applications. Click Here to see those glasses.
- Stainless Steel Work Surface #1633
- Tweezer Tube Holder #4519
- Locking Tube Clamp #2557
- Graphite Table Pad
- Graphite Octagon Reamer
- Flameworkers stainless steel pliers
- Carbide Scoring Knife #1422
- Set of Graphite Rods - 5 sizes
The discounted pricing listed below for this kit applies only when the complete kit is purchased - no subsitutions except where noted - torch and safety glasses.
-----
Torch Substitutions
We have other torches available if you'd like to substitute them in your kit. Call us at 800-946-8452
and let us know which torch you'd like to substitute and we will adjust the price accordingly.
Click here to see the torches we carry.
-----
Add to your kit:
 |
Contemporary Lampworking
|
Work Surfaces
for
Torch Lampworking, Glassblowing and
Glass Beadmaking
Propane Bottle Holder with Work Surface
| Description | Price | |
 |
Propane / Mapp bottle holder and work
surface #1645 Holds both the narrow and wide style bottles. 9" x 14" |
$24
|
 |
Propane / Mapp bottle holder and work surface #1650 Holds both the narrow and wide style bottles. 14" x 18" Includes an 18" built on rod rest. |
$39 |
Work Surfaces
Protect your work table.
A comfortable pair of padded foam armrests
and worksurface and rod rest all in one! All stainless steel.
Pictured with a Minor Burner not included.
Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
| Size | Description | Price | |
 |
#1617 12"x 13" |
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. | $16
|
 |
#1644 13" x 18" |
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. | $24 |
 |
#1636 17" x 18" |
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. | $29
|
 |
#1655 16"x 28" |
Stainless Steel work surface - actually 16" x 28" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. | $45 |
 |
#1643 14"x 28" |
Stainless Steel work surface with Arm rests and built on rod rest - 14" x 28" flat area. (Actually a bit smaller so we can fit it in a standard box.) PLUS if this is shipped, it must go in it's own box. | $55 Temporarily Out of Stock |
Accessories pictured not included.
Glass Rod RestsThis movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
| Item# | Description | Price |
| #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench | $5.00
|
|
| #RRT9 - 9" Rod rest - fits inside 10" kilns or on your workbench | $6.00
|
|
 |
#RRT8T - 8" Rod rest - Extra Tall for easy Grabbing - see below | $7.00
|
 |
#RRT9T - 9" Rod rest - Extra Tall for easy Grabbing - see below | $8.00
|
| #RRT12T - 12" Rod rest - Extra Tall for easy Grabbing - see below | $10.00
|
|
 |
#RRT17T - 17" Rod rest - Extra Tall for easy Grabbing - see below | $14.00
|
Difference between standard and tall rod rests.
Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap
