Kit 9

For making Glass Beads, Marbles, Scupltures and Vessels

With the Carlisle CC Torch

 This kit uses the two gas (oxygen and propane) Carlisle Burner.

Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Click here to find out more about gas tanks. It costs about $1 to $2 per hour to run the Major Burner torch.

Use this kit when you want to be assured that you have the most complete set of tools for the professional flameworker. Equipment in this kit can also be used buttons, marbles, vessels, beads and sculptures. Additional equipment may be required.

(What you get is what is on the list below - the pictures may not be updated)

Kit #9 Includes:

• Torch an Gas Equipment
  • Carlisle CC Torch (or select any other torch - look at the bottom of this page for your choices)
  • Torch Mounted Marvering Pad
  • Oxygen Regulator
  • Propane Regulatorclick here for an important choice you need to make
  • Twin Hose Set
  • Sparklighter
• Tools
  • Graphite marvering pad for your table top
  • Enhanced Didymium Safety Glasses - high quality enhanced didymium lens! - the real thing! watch out other web sites are not selling the real didymium in their kits - but some inexpensive "welding" type glasses which do not do what true didymiums do. You can upgrade these glasses in this kit if you want clip ons, large frames, cool looking frames or to add additional protection for working with borosilicate glass or other applications. Click Here to see those glasses.
  • Set of tweezers
  • Flameworkers stainless steel pliers
  • The Grippie - Grabbs a glass tube
  • Carbide Scoring Knife
  • Set of Graphite Rods - 5 Sizes

 All for Only $1579

The discounted pricing listed below for this kit applys only when the complete kit is purchased - no substitutions please.

Torch Substitutions

We have other torches available if you'd like to substitute them in your kit. Call us at 800-946-8452
and let us know which torch you'd like to substitute and we will adjust the price accordingly.

Click here to see the torches we carry.

Add to your kit:

Click here to see Glass

Click here to see videos working with Soft glass	Click here to see videos working with Hard (Pyrex) glass	Click here to see videos for all types of glass

	How to Make Glass Beads - A a how to book by Cindy Jenkins - full color, low cost beginners book for the glass beadmaker - only $21.95 OR check out the incredible Passing the Flame Book for $75 Click Here to see the books!
	Add some glass to your kit

Work Surfaces

for
Torch Lampworking, Glassblowing and
Glass Beadmaking

Propane Bottle Holder with Work Surface

 Holds your disposable MAPP or propane bottle safely and at the correct angle for your torch. We recommend the HotHead Torch. Torch height is adjustable. Includes a built in tool and glass rod rest. All rust proof series 300 stainless steel. Holder holds both the wide and narrow shaped gas tank. Should be clamped or screwed to the table. Lower section is cut in to give you more leg room. Lower part that holds tank can be bent to adjust the torch angle. Torch and  propane tank not included. Dimensions are approximate. Made in the USA
 

	Description	Price
	Propane / Mapp bottle holder and work surface #1645 Holds both the narrow and wide style bottles.   9"  x 14" Made in the USA	$24
	Propane / Mapp bottle holder and work surface #1650 Holds both the narrow and wide style bottles.  14" x 18" Includes an 18" built on rod rest.  Made in the USA	$39

---

Work Surfaces

Protect your work table. A comfortable pair of padded foam armrests and worksurface and rod rest all in one! All stainless steel. Pictured with a Minor Burner not included.

Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.

	Size	Description	Price
	#1646 10.5"x 11"	Stainless Steel Work Surface - 10.5" x 11" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods.  Made in the USA	$15
	#1644 13" x 18"	Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.  May need to be sent in it's own box.  Made in the USA	$24
	#1636 18" x 18"	Stainless Steel Work Surface - 18" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.  May need to be sent in it's own box.  Made in the USA	$29
	#1655 16"x 28"	Stainless Steel work surface - actually 16" x 28" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box.  Made in the USA	$45
	#1649 16"x 36"	Stainless Steel work surface - actually 16" x 36" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 36" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box.  Made in the USA	$45
	#1643 14"x 28"	Stainless Steel work surface with Arm rests and built on rod rest - 14" x 28" flat area. (Actually a bit smaller so we can fit it in a standard box.) PLUS if this is shipped, it must go in it's own box.  Made in the USA	$55
	#1656 24"x 36"	Stainless Steel work surface with Arm rests and a 36" built on rod rest - 24" x 36" flat area. PLUS if this is shipped, it must go in it's own box. Made in the USA	$75

Accessories pictured not included.

---

Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item#	Description	Price
	#RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench Made in the USA	$6.00
	#RRT9 - 9" Rod rest - fits inside 10" kilns or on your workbench Made in the USA	$7.00
	#RRT8T - 8" Rod rest - Extra Tall for easy Grabbing - see below Made in the USA	$7.00
	#RRT9T - 9" Rod rest - Extra Tall for easy Grabbing - see below Made in the USA	$8.00
	#RRT12T - 12" Rod rest - Extra Tall for easy Grabbing - see below Made in the USA	$10.00
	#RRT17T - 17" Rod rest - Extra Tall for easy Grabbing - see below Made in the USA	$14.00

Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap