Kits for Lampworkers and Glass Beadmakers

Kit#4 with Minor Burner Torch by Nortel, oxygen and propane gas regulators, hose set, sparklighter. For making your own glass sculptures.

Kit #4 with the Minor Burner Torch by Nortel.



Connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Rent an oxygen tank at your local welding supply store. Typically costing $5 per month to rent the tank and $15 to $35 each time you have it refilled. It costs about $1 per hour to run the Minor Burner torch. Use this kit when you want to upgrade from a Hothead torch and you already have some tools. Place an order now.

Kit #4 Includes:

  • Minor Bench Burner - by Nortel Torch is Only $139 when purchased in this kit!!
  • Oxygen Regulator - Quality American Made!
  • Propane Regulator - Quality American Made! click here for regulator information
  • Twin Hose Set - High Quality "T" Grade Hose - 12 foot
  • Spark lighter
 Our Kit Price  $299
 Our price if items are purchased separately  $323
 Our competitors "SALE" price - same exact items  $325
 Our competitors regular kit price - same exact items  $375

All for only $299





Oxygen Concentrator


If you are going to use an oxygen concentrator, (instead of an oxygen tank) you do not need an oxygen regulator. It is OK to purchase any of our kits without the oxygen regulator. Subtract $50 off the price of any kit.
If you want to see all about this great oxygen concentrator Click Here.

Never buy Oxygen AGAIN!! Oxygen Concentrator $475 Click Here for Details The Oxygen Regulator is not needed if you use an Oxygen Concentrator. We can remove the regulator from the kit and adjust the price of the kit. Oxygen Concentrator generate your own oxygen.



You can substitute the torch in this kit. Substitute any torch we sell.
We will adjust the price accordingly. Some sample torches are listed below.
Click Here to see all our torches.


  Minor Burner Torch for making glass sculptures.  This Kit with the
Minor Burner Torch
$299
  glass-torch-mega-minor-nortel  This Kit with the
Mega Burner Torch
$359
glass-torch-technology-bobcat  Bobcat
by Glass Torch Technology
 $329
glass-torch-technology-lynx  Lynx
by Glass Torch Technology
 $565
 Bethelhem Betta Torch for making glass sculptures.

 This Kit with the

Bethlehem Betta Torch

Click Here to see all about this torch.

 $479
 Midrange Torch for making glass sculptures.  This Kit with the Midrange Torch $429
 Major Burner Torch with Surface Mix Torch Mount for making glass sculptures.  This Kit with the Major Burner Torch with Surface Mix Torch Mount $529
 National 8MT Torch for making glass sculptures.

 This Kit with the

National 8MT Torch

$319
National 8M +HTC3 Tip when working with borosilicate/pyrex/hard glass in making glass sculptures. This Kit with  National 8M +HTC3 Tip - Works with COE33 Borosilicate Hard Glass Only.
See more about this torch. 
$325
Red Max Torch for making glass sculptures.  This Kit with the Red Max Torch
Choose either Surface Minor
or
Pre-Mix Tip
With 3/8" Hose
 $599
  This Kit with the Red Rocket $958
Kit without a torch $159
We recommend that you add the following to your kit:
 Making Glass Beads for instructions on how to make your own glass beads and for setting up your glass art studio. How to Make Glass Beads - A a how to book by Cindy Jenkins - full color, low cost first beginners book for the glass beadmaker OR check out the incredible Passing the Flame Book Click Here to see the books!
45 Piece Moretti/Effetre Rod Set #1654-45 for making glass sculptures like beads and little animals or figures. Add some glass to your kit


Propane Bottle Holder with Work Surface

All stainless steel. Holds your propane bottle safely and at the correct angle for your torch. Torch and propane tank not included. We recommend the HotHead torch. Includes a built in tool and glass rod rest. Holder holds both the wide and narrow shaped gas tank. Should be clamped or screwed to the table.
 

Item# Description Price
1618 Propane / Mapp bottle holder and work surface 8"  x 11" $22.00
1620 Propane / Mapp bottle holder and work surface 11" x 20" $32.00

Work Surfaces

Protect your work table A comfortable pair of padded foam armrests and worksurface and rodrest all in one! All stainless steel. Pictured with a Minor Burner not included.
No. Size Description List Price
1631 9"x 11" Stainless Steel Work Surface - 9" x 11" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. $12
stainless work surface 1617 12" x 13" Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. $16
stainless-work-surface 1633 24" x 13" Stainless Steel work surface - 24" x 13" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods. No boxing fee. $29
stainless work surface 1635 14" x 23" Stainless Steel work surface - 14" x 23" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 14" long rest for your colored glass rods. No boxing fee.
$29
stainless-work-surface 1638 17" x 24" Stainless Steel work surface - 17" x 24" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods. No boxing fee. $38
stainless-work-surface 1639 22.5"x 28" Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. $45
worksurface for torch lampworking 1641 20"x 28" Stainless Steel work surface with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4.00 boxing fee. $65


Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.

Item# Description  Price
RRT8 8" Rod rest - fits inside 9" kilns or on your workbench $5.00
RRT9 9" Rod rest - fits inside 10" kilns or on your workbench $6.00
RRT17 16" Rod rest - fits inside 18" kilns or on your workbench $11.00
RRT12T 12" Rod rest - Extra tall for glassblowers - see below $16.00
glass-rod-rest-lampworking
Difference between standard and tall rod rests.







Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap






Specials!
Classes
  • Beginning Glass Fusing 1101
    $325 Three day class
    April 16, 17 & 18
    details
  • Intermediate/Advanced
    Glass Fusing 1102
    $325 Three day class
    April 30, May 1 & 2
    details
  • NEW FUSING CLASS
    Green Fusing Class!
    Learn how to fuse glass
    for FREE (almost)
    using recycled glass,
    garage sale glass,
    donated glass, bottles,
    $1 store glass, etc...
    it's amazing how much
    variety and how many
    designs are possible!

    April 24 & 25
    $325
    details
  • Glassblowing
    with a Torch - $295
    April 10, 11
    details
  • Welding and Metalmaking
    for display stands
    or any metal art - $350
    March 13 and 14
    April 10 and 11
    details
  • Sandcarving Glass Class
    for Glass Fusing or
    Any Etch Art - $350
    June 4, 5 & 6
    details
  • Glass Beadmaking
    Beadmaking with a Torch
    Learn to make beads! - $265
    June 19 & 20
    details

 




 


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021  |  Fax: 530.876.8561