Professional Flameworkers Kit
for making glass beads, marbles,
vessels & sculptures
Kit #420Xtream
This kit uses the two gas (oxygen and propane) Major Bench Burner by Nortel. (or pick a different torch - see below)
Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Click here to find out more about gas tanks. It costs about $1 to $2 per hour to run the Major Burner torch.
Use this kit when you want to be assured that you have the most complete set of tools for the professional beadmaker. This equipment can also be used buttons, marbles, vessels and sculptures.
(What you get is what is on the list below - the pictures may not be updated)
Kit #420X Includes:
- Torch an Gas Equipment (remember to use your back key to get
back here!)
- Major Bench Burner by Nortel (or select any other torch - look at the bottom of this page for your choices)
- Tip - HT1
- Tip - HT3
- Oxygen Regulator
- Propane Regulator
- Twin Hose Set
- Flash Back Arrestors
- Sparklighter
- Tools (remember
to use your back key to get back here!)
- Blow Hose Assembly
- Hot Glass Shears
- Enhanced Didymium Lens Safety Glasses You can upgrade these glasses in this kit if you want clip ons, large frames, cool looking frames or to add additional protection for working with borosilicate glass or other applications. Click Here to see those glasses.
- Tweezer Tube Holder #4519
- Graphite Table Pad
- Set of 2 Octagon Reamers
- Graphite Hand Paddle
- HF420 Holding Fingers for Pipes
- Flameworkers stainless steel pliers
- Carbide Scoring Knife
- Squashing Pliers #1579
- Tweezer Smashers #15701
- Frit Bowl #6111
- Set of Graphite Rods - 5 sizes
- Set of Bowl Pushers
- Set of Flaring Tools
- Set of 2 Tungsten Probes on wooden handles
- Set of 2 Tweezers
Plus These Tools
The discounted pricing listed below for this kit applies only when the complete kit is purchased - no subsitutions please.
You can subsitute the torch in this kit. Subsitute any torch we sell. We will adjust the price accordingly. Some sample torches are listed below.
 |
||
 |
||
 |
||
 |
||
 |
Contemporary
Lampworking 2nd Edition- A how to book by Bandhu Scott Dunham
- full color, the best book available for the glass flameworker.
Click here to see
all about this book! - only $32.95
Let us pull a selection of Tubing and
Colored Rod for you. We know exactly what you need. Choose $50
worth or $100 worth or $200.
Click here to see:
- more about Borosilicate Pyrex type clear glass rod and tubing and
- more about colored rod
Add to your kit:
|
Click here to see
videos on
how to make glass pipes
Propane Bottle Holder with work surface
All stainless steel. Holds your propane
bottle safely and at the correct angle for your torch. Torch
and propane tank not included. We recommend the HotHead torch.
Includes a built in tool and glass rod rest. Holder holds both
the wide and narrow shaped gas tank. Should be clamped or screwed
to the table.
Order #
Description
Price
1618
Propane / Mapp bottle holder and work surface 8" x 10"
$20
1620
Propane / Mapp bottle holder and work surface 10-1/2" x 16"
$28
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
No.
Size
Description
List Price
1631
9"x 11"
Stainless Steel Work Surface - 9" x 11"
flat area, heavy .030" thick metal. One edge is bent so
you can wrap it over the edge of your work bench. The far edge
is also bent up right so you have a nice 9" long rest for
your colored glass rods. Made in the USA
$12
1617
12" x 13"
Stainless Steel Work Surface - 12" x
13" flat area, heavy .030" thick metal. One edge is
bent so you can wrap it over the edge of your work bench. The
far edge is also bent up right so you have a nice 13" long
rest for your colored glass rods. Made in the USA
$16
1633
13" x 24"
Stainless Steel work surface - 13" x
24" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 24" long rest for
your colored glass rods. No boxing fee. Made in the USA
$29
1635
14" x 23"
Stainless Steel work surface - 14" x
23" flat area, heavy thick metal. Front edge is bent so
it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 14" long rest for
your colored glass rods. No boxing fee. Made in the USA
$29
1639
22.5"x 28"
Stainless Steel work surface - actually 22.5"
x 28.5" flat area, heavy thick metal. Front edge is bent
so it fits nicely over the edge of your work table. The far edge
is also bent up right so you have a nice 28" long rest for
your colored glass rods. PLUS if this is shipped, it must go
in it's own box plus add a $4 boxing fee. Made in the USA
$45
1641
20"x 28"
Stainless Steel work surface - with Arm rests and
built on rod rest - 20" x 30" flat area - see picture
above - PLUS if this is shipped, it must go in it's own box plus
add a $4 boxing fee. Made in the USA
$65
Glass Rod
Rests This movable rod rest is used
to support glass rods to keep them up off the flameworker's workbench
for easier grabbing, better organization, and to keep the glass
rods cleaner. The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed
inside a glass bead kiln to support your mandrels. Made in the USA
Order #
Description
Price
RRT8
8" Rod rest - fits inside 9" kilns or on your workbench
$5
RRT9
9" Rod rest - fits inside 10" kilns or on your workbench
$6
RRT17
16" Rod rest - fits inside 18" kilns or on your workbench
$11
Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Supplies.
Click here to see videos on
how to make glass pipes
Propane Bottle Holder with work surface
All stainless steel. Holds your propane bottle safely and at the correct angle for your torch. Torch and propane tank not included. We recommend the HotHead torch. Includes a built in tool and glass rod rest. Holder holds both the wide and narrow shaped gas tank. Should be clamped or screwed to the table.
| Order # | Description | Price |
| 1618 | Propane / Mapp bottle holder and work surface 8" x 10" | $20 |
| 1620 | Propane / Mapp bottle holder and work surface 10-1/2" x 16" | $28 |
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
| No. | Size |
Description |
List Price | |
| 1631 | 9"x 11" | Stainless Steel Work Surface - 9" x 11" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. Made in the USA | $12 | |
 |
1617 | 12" x 13" | Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. Made in the USA | $16 |
 |
1633 | 13" x 24" | Stainless Steel work surface - 13" x 24" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods. No boxing fee. Made in the USA | $29 |
 |
1635 | 14" x 23" | Stainless Steel work surface - 14" x 23" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 14" long rest for your colored glass rods. No boxing fee. Made in the USA | $29 |
 |
1639 | 22.5"x 28" | Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4 boxing fee. Made in the USA | $45 |
| 1641 | 20"x 28" | Stainless Steel work surface - with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4 boxing fee. Made in the USA | $65 |
Glass Rod
Rests This movable rod rest is used
to support glass rods to keep them up off the flameworker's workbench
for easier grabbing, better organization, and to keep the glass
rods cleaner. The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed
inside a glass bead kiln to support your mandrels. Made in the USA
| Order # |
Description |
Price |
| RRT8 | 8" Rod rest - fits inside 9" kilns or on your workbench | $5 |
| RRT9 | 9" Rod rest - fits inside 10" kilns or on your workbench | $6 |
| RRT17 | 16" Rod rest - fits inside 18" kilns or on your workbench | $11 |
Look in our index. Click on: Supplies.
Order Now
Catalogs
