logo

Print version of this page

Kit #420 Basic
for Making Glass Pipes & Sculptures

The Pipemakers Kit for making glass pipes and small to large glass sculptures. Learn how to make bubblers!

Kit comes with the National 6B Torch with HTC1 Tip

kit #4 with a major burner torch and a pre mix on top

This kit uses the two gas (oxygen and propane) 6B Torch by National.
See below if you want to change out the torch.


Everything you would need to make not only glass pipes but borosilicate (Pyrex) sculptures, ornament, jars... etc. *You would still need to get your Oxygen and Propane Gasses locally, Glass and Instruction (Video, Books or Our Great Classes)
Just connect this torch to a BBQ type propane tank (you may have one in your back yard) and to an oxygen tank. Most people rent this oxygen tank at their local welding supply store. It might typically cost $5 per month to rent the tank and about $15 to $35 each time you have it refilled. Use this kit when you want to be assured that you have the set of tools you need to make pipes.

regulator thumbIf your planning to use an Oxygen Concentrator with your kit put a note in your order or give us a call. We will remove the oxygen regulator from the kit. We will then deduct $60 from your order if paying by credit card or refund your PayPal account $60.

(What you get is what is on the list below - the pictures may not be updated)
-Barbed fittings will be sent depending on torch purchased-

Kit #420 Basic Includes:
  • Torch an Gas Equipment
  • Tools
    • Hot Glass Shears
    • Enhanced Didymium Safety Glasses! - Choose which style frame you want! High quality enhanced didymium lens! - the real thing! watch out other web sites are not selling the real didymium in their kits - but some inexpensive "welding" type glasses which do not do what true didymium's do. You should consider if the small frame or wide frame glasses would be more comfortable for you. Some people with smaller heads find the wide frames uncomfortable This kit comes with the Small Framed Glasses standard. You can upgrade to wide frame glasses in the Shopping Cart.  Click Here to see those glasses.
    • Shade 3 Clip on Glasses adds more protection to the Didymium Glasses
    • Grippie Tube Holder #2558
    • Flameworking Tweezer
    • Carbide Scoring Pen
    • Set of three pick/reamer with bowl push
    • Rod Rest

The discounted pricing listed below for this kit applies only when the complete kit is purchased - no substitutions please. If you do not need all of the items in the kit, the items can be purchased separately.

All for Only $420


You can substitute the torch in this kit. Substitute any torch we sell.

kit #4 with the Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Minor Burner Torch

Item #420BMinor

Regular Price - $476
Our Kit Price - $445
You save $31


kit #4 with the Mega Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Mega Minor Torch

Item #420BMega

Regular Price - $506
Our Kit Price - $475
You save $31


kit #4 with the Minor Torch by Nortel for lampworkers Glass Beadmakers and Glassblowers This kit with the
Alpha Torch

Item #420BAlpha

Regular Price-$494

Our Kit Price -$463

You save $31

  kit #4 with the Bravo torch by Bethlehem for lampworkers Glass Beadmakers and Glassblowers This kit with the
Bravo Torch

Item #420BBravo

Regular Price-$1167

Our Kit Price-$1136

You save $31

Midrange Torch for making glass sculptures. This kit with the
Midrange Torch

Item #420BMid

Regular Price - $583

Our Kit Price - $552

you save $31


midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange Surface Mix Torch with Minor Bench Burner mounted on top

Item #420BMidMin

Regular Price - $693

Our Kit Price - $662

you save $31


midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange with Mega Minor Bench Burner
mounted on top

Item #420BMidMega

Regular Price - $739

Our Kit Price - $708

you save $31

midrange glass torch for lampworkers glass beadmakers and glassblowers This kit with the Midrange

Pre Mix Torch

Item #420BMidPre

Regular Price - $693

Our Kit Price - $662

you save $31

major glass torch for lampworkers glass beadmakers and glassblowers This kit with the Major Bench Burner Surface Mix Torch with Minor Bench Burner mounted on top

Item #420BMajMin

Regular Price - $713

Our Kit Price - $682

with 3/8" hose - you save $31

kit #4 with a major burner torch and a mega minor on top This kit with the Major Bench Burner Surface Mix Torch with Mega Minor Bench Burner mounted on top

Item #420BMajMega

Regular Price - $763

Our Kit Price - $732

with 3/8" hose - you save $31

kit #4 with a major burner torch and a pre mix on top This kit with the Major Bench Burner Premix Torch


Item #420BMajPre

Regular Price - $713

Our Kit Price - $682

with 3/8" hose - you save $31

Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch
with Minor Bench Burner mounted on top

Item #420BMaxMin

Regular Price - $813

Our Kit Price - $782

with 3/8" hose - you save $31
Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Surface Mix Torch with Mega Minor Torch mounted on top

Item #420BMaxMega

Regular Price - $863

Our Kit Price - $832

with 3/8" hose - you save $31


  Red Max torch for lampworkers glass beadmakers and glassblowers This kit with the Red Max Premix Torch


Item #420BMaxPre

Regular Price - $813

Our Kit Price - $782

with 3/8" hose - you save $31


kit #4 with the 8m torch and the sm7 tip This kit with the
National 8M7 Torch
& SM7 Tip

Item #420B8M7

Regular Price $537

Our Kit Price - $506

You Save $31

National 8M +HTC3 Tip when working with borosilicate/pyrex/hard glass in making glass sculptures. This kit with National 8M HTC1 Tip

Item #420B8M2

Regular Price $566

Our Kit Price - $535

You Save $35


kit #4 with the national 6b torch and htc1 tip This kit with the National
6B Torch and the popular HTC1 Tip

Item #420B6B

Regular Price - $451

Our Kit Price - $420
You Save $31

   kit #4 with the Red Max Glass Torch by Nortel with the pre mix top torch This kit with the
Red Rocket Torch
With the Premix Sidefire

Item #420BRocPre

Regular Price - $1343

Our Kit Price - $1312

You Save $31
kit #4 with the mini cc torch This kit with the Carlisle
Mini CC Torch

Item #420BMiniCC

Regular Price $513

Our Kit Price-$471

You Save $42
  This Kit with the Carlisle WildCat Torch

Item #420BWildCat

Regular Price-$727

Our Kit Price-$696

You Save $31
Kit4 with HellCat burner This Kit with the Carlisle HellCat Torch

Item #420BHellCat

Regular Price-$1152

Our Kit Price-$1121


You Save $31
  Kit4 with Black Widow This Kit with the Carlise Black Widow Torch

Item #420BBlackWidow

Regular Price-$1746

Our Kit Price-$1715

You Save $31
Mini Milon by Nortel This Kit with the Nortel Mini Milon PreMix Torch

Item#420BMiniMilon

Our Regular Price-$513

Our Kit Price-$478

You Save $31
    You can also order this
Kit without a Torch!
These kits may also be edited once you place the Kit in shopping cart


Kit #420B14
with a 12ft 1/4" hose
Our Low Price - $308




Kit #420B38 with a 12ft 3/8" hose
Our Low Price - $315.50







Flashback Arrestor for preventing the torch flame from going down the hose to the gas tank. Optional

Flashback Arrestors

Flashback Arrestors - This is not required to operate your torch. It is a recommended safety device. In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion. This device helps prevent this reverse gas flow and flashback. This device uses a reverse flow check valve and a flame arrestor that stops this flashback flame. Packaged and priced with both an oxygen and a propane arrestor. Gas flow is in one direction only. Arrow showing gas flow direction is stamped on the side of the flashback arrestor.


Item # FA30 - $59


 


Oxygen Concentrator

If you are going to use an oxygen concentrator, (instead of an oxygen tank) you do not need an oxygen regulator. It is OK to purchase any of our kits without the oxygen regulator. Subtract $60 off the price of any kit. If you want a great deal on an oxygen concentrator Click Here.

Never have to buy Oxygen AGAIN!!

Oxygen Concentrator

$399

Click Here for Details

Oxygen concentrator from generating/concentrating your own oxygen. Never have to buy oxygen again!



Torch Substitutions


We have other torches available if you'd like to substitute them in your kit. Call us at 800-946-8452
and let us know which torch you'd like to substitute and we will adjust the price accordingly.

Click here to see the torches we carry.




Add to your kit:

Making Glass Pipes
Add to your glass pipe making kit a video for learning how to make glass pipes.
Click here to see videos on how to make glass pipes

Work Surfaces

for
Torch Lampworking, Glassblowing and
Glass Bead making



worksurfaceWork Surfaces

Protect your work table. A comfortable pair of padded foam armrests and work surface and rod rest all in one! All stainless steel. Pictured with a Minor Burner not included.
rod rest Troch Mount
Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
Size   Description  Price
 Stainless Steel work surface for lampworking glass beadmaking and glassblowers #1617
12"x 13"
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. $16
work surface for lampworking glass beadmaking blassblowing #1636
17" x 18"
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.  May need to be sent in it's own box. $29
work surface for lampworking glass beadmaking blassblowing #1638
16" x 24"
Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods.  May need to be sent in it's own box. $38
worksurface for lampworking glass beadmaking and glassblowing #1644
13" x 18"
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods.  May need to be sent in it's own box. $24
work surface 1659 #1659
16"x 30"
Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 30" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. $49

Accessories pictured not included.
Morretti Northstar Boroscilicate Pyrex Effetre colored glass rods resting and holding place. Durable, portable, stainless steel, can also go inside your glass bead sculpture kiln Glass Rod Rests
This movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.


Item# Description  Price
rod and tool rest  #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing
Buy 1 6.00
Buy 2 $5.40
Buy 4 $4.80
Buy 8 $4.20
$6.00

Qty:


tool and rod rest for lampworkers #RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30
$9.00
Qty:
tool and rod rest for lampworkers #RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench

Volume Pricing
Buy 1 $11.00
Buy 2 $9.90
Buy 4 $8.80
Buy 8 $7.70
$11.00
Qty:
tool and rod rest for lampworkers #RRT8T - 8" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $9.00
Buy 2 $8.10
Buy 4 $7.20
Buy 8 $6.30

$9.00
Qty:


tool and rod rest for lampworkers #RRT12T - 12" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $12.00
Buy 2 $10.80
Buy 4 $9.60
Buy 8 $8.40
$12.00

Qty:
rod and tool rest #RRT17T - 17" Rod Rest
Extra Tall
for easy Grabbing

Volume Pricing
Buy 1 $14.00
Buy 2 $12.60
Buy 4 $11.20
Buy 8 $9.80

$14.00
Qty:
glass-rod-rest-lampworking
Difference between standard and tall rod rests.






Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap



Tool Caddy
$28.00



 Organize your bench top with this handy tool caddy

Tool Caddy



Shopping Cart




Specials!
New Stuff And Sales!

Clearance Items!
  • Used items - Prototypes - Discontinued Items
  • Surplus Items - Scratched or Cosmetic Issues
  • New but dirty Packaging - New But Overstocked
  • New but Clearanced Items - Bottom of the Barrel
  • Tweeked or Bent but totally useable
Clearance It



Classes
  • Glassblowing 2110
    with a Torch
    $325
    To Be Scheduled
    details
  • Glass Beadmaking 2101
    Beadmaking with a Torch
    Learn to make beads!
    $265
    May 3&4th
    details




Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021  |  Fax: 530.876.8561