Order Now
Kits for Lampworkers and Glass Beadmakers
Kit #4 with the Red Max Torch
Mega Burner top torch
Our competitor's regular price: $834
Our price if items are purchased individually: $716
Our kit price: $699
Kit #4 Includes:
- Red Max Burner by Nortel
- Oxygen Regulator - Quality American Made!
- Propane Regulator - Quality American Made!
- Twin Hose Set - High Quality "T" Grade Hose - 12 foot
- Spark lighter
If you
do not want all of the items in this kit,For example, oxygen regulator is not needed if you use an oxygen concentrator
or you may already have an item in the kit.
Use the below button instead of the above button to modify this kit.
Then remove the items on the shopping cart.
Discounts may vary.
| (Do you like this kit but want a different torch? - Click Here to see) |
Torch Mounted
Marvering Pad $46
Puts a warm marvering pad close to the flame
Connect this torch to a BBQ type propane tank and to an oxygen tank. Rent an oxygen tank at your local welding supply store. It typically costs $5 per month to rent the tank and $15 to $35 each time you have it refilled. It costs about $1 per hour to run the Mega Minor Burner torch. Use this kit when you want to upgrade from a Hothead torch and you already have some tools.
Items you may need with your kit.
|
Didymium Glasses Economy Glasses for Lampworking $42  For more Options in Glasses Click here |
Up Grade Your Hose  The hose in this kit is the high quality T grade 12 feet long hose. You can upgrade the length to 25 feet for $12 more. |
A Great DVD To Add To Your Kit $19.95 
|
|
Add Glass to Your Kit
Choose one or both. Moretti Effetre Soft Glass $29-$39  Add some glass to your kit
Borosilicate Hard Glass Assortment $39  Click Picture for contents.
|
Great Book To Add To Your Kit $59  This 2 volume set covers almost every lampworking subject. There are no instructions included with this kit.
Learn how make glass beads with our videos, classes and books. |
Flashback Arrestor
$54 Optional Safety Equipment  In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion. This device helps prevent this reverse gas flow and flashback by using a reverse flow check valve and a flame arrestor. Packaged and priced with both an oxygen and a propane arrestor . |
Work Surfaces
for
Torch Lampworking, Glassblowing and
Glass Beadmaking
Work Surfaces
Protect your work table.
A comfortable pair of padded foam armrests
and worksurface and rod rest all in one! All stainless steel.
Pictured with a Minor Burner not included.
Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
| Size | Description | Price | |
 |
#1617 12"x 13" |
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. | $16
|
 |
#1644 13" x 18" |
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. | $24 |
 |
#1636 17" x 18" |
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. | $29
|
 |
#1655 16"x 28" |
Stainless Steel work surface - actually 16" x 28" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. | $45 |
 |
#1643 14"x 28" |
Stainless Steel work surface with Arm rests and built on rod rest - 14" x 28" flat area. (Actually a bit smaller so we can fit it in a standard box.) PLUS if this is shipped, it must go in it's own box. | $55
|
Accessories pictured not included.
Glass Rod RestsThis movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
| Item# | Description | Price |
| #RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench | $5.00
|
|
| #RRT9 - 9" Rod rest - fits inside 10" kilns or on your workbench | $6.00
|
|
 |
#RRT8T - 8" Rod rest - Extra Tall for easy Grabbing - see below | $7.00
|
 |
#RRT9T - 9" Rod rest - Extra Tall for easy Grabbing - see below | $8.00
|
| #RRT12T - 12" Rod rest - Extra Tall for easy Grabbing - see below | $10.00
|
|
 |
#RRT17T - 17" Rod rest - Extra Tall for easy Grabbing - see below | $14.00
|
Difference between standard and tall rod rests.
Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap
