Table Top Kilns
for Lampworking, Glassblowing and Beadmaking

The 5628 is a dream kiln for the glass bead or glassblowing enthusiast. It safely anneals the glass to prevent breakage during cooling.
The kiln opens doorways of opportunity in beadmaking. The 4 ½ tall, 10 wide double doors give a total of 20 width for inserting bead rods. This kiln is ideal for seminar teachers. It is like having two kilns instead of one.
The 5628 has a user-friendly 3-key Sentry Xpress digital controller. It automatically maintains the annealing temperature that you program. The controller is packed with features but is so easy to use that your child could program it.
The 5628 has durable insulating firebricks in the roof, walls and floor. The element is seated in pin less grooves in the roof. This is a true high performance kiln you will enjoy using often.
The rugged steel case is light weight, portable, with a slotted base and louvered switch box for long life of the electrical system. The 5628 plugs into a standard household outlet. The kiln ships by convenient UPS.
Features of the 5628
3-key digital Sentry Xpress controller
2 - 10 wide x 4 ½ high doors
9 deep firing chamber (measured with doors closed)
Firebrick roof, walls, and floor
1 thick ceramic fiber doors
Mandrel holder with 20 slots
1700°F maximum temperature: Make glass fusing, copper enameling, and silver clay
Pin less element grooves in the roof
Coated firebricks in roof
Mar-proof plastic feet
On-off safety switch
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold. The solid state controller continually monitors the firing so you can spend your time productively without closely watching the kiln. The sealed controller touch pad keeps out dust and is easy to wipe clean.
The 5628 Kiln |
List Price | Our Low Price |
| 5628 | $880 | $795 |
Features of the Sentry Xpress 3-key Controller on Non-Ceramic Kilns Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Speed mode.
Ramp-Hold mode can store 4 programs.
Skip a segment in Ramp-Hold during firing.
Change the target temperature in Ramp-Hold during firing.
Hold (soak) the temperature in both Single Speed and Ramp-Hold.
Control both heating and cooling in Ramp-Hold.
Program Review lets you check the program you are about to fire.
A temperature alarm.
Temperature Display throughout firing and cooling in your choice of °F or °C
Thermocouple Offset adjusts the thermocouple readout.
Set the Delay to turn on the kiln later to suit your schedule.
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
12 Month Warranty
LED Lights show whether you are in program, review, or firing mode.
Colorful, illustrated instruction manual. Download it from the Additional Information section below to review these features in more detail. Specifications Max. Temperature1700F [926C]
Amps14
Phase1
Watts1700
Nema5-15R
Breaker Size20
Circuit Wire Size12 gauge
UL Std 499N
CEN
Control Type: Sentry Digital 3-key Glass Control
Voltage120
Hertz60
Sides4 Chamber Volume0.47 CU.FT. [13.31 liters]
Chamber Width20.00 [508 mm]
Chamber Depth9.00 [229 mm]
Chamber Height4.50 [115 mm]
Outer Size32.50W x 15.00D x 12.50H Inches [826W x 381D x 318H mm]
Ship Size38.00W x 21.00D x 19.00H Inches [966W x 534D x 483H mm]
Ship Weight80.00 Lbs. [36.29 Kg.]
Ship Method: Standard
| BlueBird |
1200ºF 648ºC |
Width/Diameter: 20" Height: 5" Depth: 5" |
| BlueBird XL | 1700ºF 926ºC |
Width/Diameter: 20" Height: 4.5" Depth: 9" |
| The BlueBird Kiln | List Price | Our LOW Price |
| BlueBird | $735 | $588 |
| BlueBird-XL | $915 | $795 |
Order Now


Catalogs