Annealing Kilns Flameworking Kilns Lampworking Kilns Glass Fusing Kilns Beadmaking Kilns - Sundance Art Glass
Sundance Art Glass


Need Your Order
in a Hurry?
For a fee of $10 your order goes ahead of regular orders. If your order is received before 10AM PST, 1PM EST we'll make every effort to see that it goes out the same day
click here to purchase

Sundance Glass
Over 40 years!

Unbeatable Pricing
Unbeatable Quality
Unbeatable Service
Unbeatable Selection


Click Here For Details


Print version of this page

Table Top Kilns



for Glassblowers, Bead makers, Flameworkers, Lamp workers, Art Clay Silver and PMC



F-130 Elite by Paragon
Vertical-Drop Door Kiln - Swings upward!

Why a Vertical-Drop Door? There is heat on the inside of a kiln door. Kilns with swing out doors expose you to the hot inside door. But this Vertical-Drop door swings up never exposing you to that hot door. A digital controller which includes a pyrometer is included with kiln. This bead kiln, made with insulated fire brick, can also be used for fusing glass, ceramics, copper enameling, or many different uses. All kilns should be kept 12" from any flammable materials. The fiber cloth door covering pictured, is included free with the kiln.

Features


  • Anneal large glass figurines in this digital lampworking kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller punty rod door. This allows the glass to anneal safely.

  • You can make figurines up to 11" tall. Maintain the annealing temperature indefinitely with the

  • Sentry Xpress 3-key controller: The Sentry Xpress 3-key controller is packed with features. It includes two modes: single Speed and 8-segment Ramp-Hold.

  • Previously employed machanical relay, now comes standard with long lasting industrial mercury relay.

  • Now with a slide out mandrel holder (also called a point rest, adjustable horizontally and vertically without tools. The holder slides inside steel tubes, which are hidden in the base of the kiln.

  • Now Comes Standard with sidewall elements, although if you prefer can still be ordered with top elements.

Specifications for the F13 Kiln
Specifications shown for F11 for comparison
Click here for further details on the F11

Model Outside Dimension Floor Inside Height
F11
Click here for more details
20.5"W x 23"D x 20"H 10¾" x 11" 7"
F13 23.5"W x 18.5"D x 26"H 10¾" x 11" 13"


Model   Amps Volts Watts at full power Max Temp NEMA Plug Configuration Approx.
Electricity Cost per Hour at 1/2 power
F11
Click herefor more details
NEMA 5-15R 14
Amps
120
Volts
1680
Watts
1800°F 5-15R 10¢
F13
NEMA 5-20R
Read More about this below*
20
Amps
120
Volts
2400
Watts
1700°F 5-20P 14¢

*If you are using a circuit with a 20 Amp circuit breaker than this F13 kiln potentially would work for you. Most often minor changes is all that is required. You should always check with professionals before working on electrical wiring.

Order# Description List Our LOW Price
F11
Click here for more details
Vertical drop door with smaller punty rod door $1350 $1,189
click here to purchase
F13 Vertical drop door with smaller punty rod door $1,510 $1,219
click here to purchase

Important Shipping Information about Kilns
(Shipping Estimates Will Not Be Correct)

The shipping quote for your order of the F13 kiln in the shopping cart check out will not reflect the actual shipping total of the order; the shipping total for orders that include the F13 need to be calculated by our customer service representatives. One of our service representatives will contact you with the lowest shipping price available for your location.

When we have the F13 in stock we ship to California, Nevada and Arizona by next day or second day service with no extra fee (this service is not available for some locales in these states); for customers in other areas of the USA and Canada, the kilns are drop shipped separately from the manufacturer. If the manufacturer has the kiln you've ordered in stock it will be shipped fairly soon. However, please note that shipping may be delayed 2-5 weeks if the manufacturer does not have the kiln in stock. This is especially true during the holiday season and other busy times of the year.

You will be contacted by one of our customer service representatives once your order has been processed and your shipping total has been calculated.




Remember, the kiln is usually not at full power when it is used. Usually it runs at half power to anneal glass or when controller heats up the kiln slowly.

Why have a side door opening for a glass bead kiln?

  • Comfort. Sure, one could put a piece of glass or mandrel into any kiln. But when you lift the lid a blast of 1000° heat will hit you. The unique feature of this kiln is small door in the large door.
  • This allows you to insert beads or other glass pieces through the small door without much heat discomfort.
  • The side door is also great for preheating glass rods.
  • Premade glass pieces which will be intended to be removed for working in the flame can be passed to and from the kiln through the side door opening without much heat discomfort.

About the Digital Controller included with this kiln:

A 4 Segment Ramp-Hold
Delay Fire
Hold
Skip Segment and Program Review

Click here to download the manual for the Controller





Ease of operation will delight you. Never before has lamp work been so easy in this price range. Imagine the massive, award-winning figurines you will be able to make with this kiln.

The F-series lid elements use a new element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The element is mounted in the top of the kiln for safety. There is no sidewall element to touch with a punty rod. With the element in the top, you can also fuse and slump glass.

Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of Dichroics. This kiln will give you a haven of creative enjoyment that you will enjoy for many years.




Kiln Type

Front Loading Square

Sides

4

Understanding Chamber Measurements

Chamber Volume

0.90 CU.FT.
25.49 litres

Chamber Width

11.00 IN
279 mm

Chamber Depth

11.00 IN
279 mm

Chamber Height

13.00 IN
330 mm

The Outer Size of the Kiln and the Shipping Size:
Width = Left to Right;
Depth = Front to Back;
Height = Top to Bottom

Outer Size

23.50W x 18.50D x 26.00H Inches
597W x 470D x 660H mm

Ship Size

38.0 x 34.0 x 32.0 Inches
965 x 867 x 813 mm

Ship Weight

173.00 Lbs.
78.47 Kg.

Max. Temperature

1700°F
926°C

Amps

20

Phase

1

Watts

2400

Nema

5-20P

Breaker Size

20

Circuit Copper Wire Size

12 gauge

TUV tested to CSA and UL Standard 499

Y

CE

N


IMPORTANT: Some areas such as Canada and Europe
require a lid or door safety switch on kilns.

Voltage

120

Hertz

60

Ship Method & Notations

This Kiln Ships Via Truck

Part Number

F13  * Base Model


Shopping Cart
Secure Shopping
Secure Checkout
Search

Specials!
New Stuff And Sales!
Clearance Items!
  • Used items
  • Prototypes
  • Discontinued Items
  • Surplus Items
  • Cosmetic Issues
  • Dirty Packaging
  • Overstocked items
  • Always functional
  • Always a great deal
  • Click here to visit
    Clearanceit.com



Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021