F16 Glass Fusing Kiln Annealing Kiln - Sundance Art Glass Paragon Fusion16
Sundance Art Glass
All Torches Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass & Hard Glass Nortel Carlisle National GTT Gas Equipment Oxygen Concentrators Torch Tips
Moretti/Effetre Soft Glass Borosilicate Hard Glass/Pyrex Bullseye Glass Dichroic Rods/Tubing Fusing Glass COE 33 COE 90 COE104
Moretti/Effetre Soft Glass Borosilicate/Pyrex Hard Glass Bullseye Dichroic Glassblowing Sculpture Boro
Fusing Tool Kits Gas Equipment Kits
Glassblowing Pyrex Pipemaking Lampworking Beadmaking Soft Glass Hard Glass Fusing Our Newsletter!
Lampworking Glassblowing Fusing Glass Bead casting
Lampworking Borosilicate Pyrex Glass Bead Soft Glass
Fusing Lampworking Beadmaking Glassblowing
For Fusing For Stained Glass
COE 90 Effetre COE 104 Borosilicate COE 33
Fusing Bead Lampworking Glassblowing Crucible Kiln Kiln Controllers Kiln Pyrometers Kiln Shelves and Posts
Lampworking Soft Glass Beadmaking GlassBlowing Hard Glass Pyrex Pipemaking

Glass Fusing Kilns

for Glass Fusers, Flameworkers and Lampworkers

F16 Kiln - "The Perfect Kiln"
glass fusing and lampworking kiln f16
The perfect kiln - WHY? - with the bead door option shown below - you can do both lampworking with a torch and fuse larger sized glass pieces! - No other kiln like this can do this - and its 120 volts!
Overall Height Outside Dimension Inside Height Floor area for fusing Volts and Amps
30" 29.5" x 34" 6-1/2" 16" x 16" 120 V - 20 Amp

Order# Description List Our LOW Price
F16 Kiln $1,336 $1,068
click here to purchase

Important Shipping Information about Kilns
(Shipping Estimates Will Not Be Correct)

 The shipping estimate for your order that you are quoted in check out will not reflect the actual
shipping total of the kiln - kilns are drop shipped separately from the manufacturer, so the shipping totals for all orders that include kilns need to be calculated by our customer service representatives.

You will be contacted by one of our customer service representatives once your order has been processed and your shipping total has been figured.

If the manufacturer has the kiln you've ordered in stock it will be shipped fairly soon. However,
please note that shipping may be delayed 2-5 weeks if the manufacturer does not have the kiln
in stock. This is especially true during the holiday season and other busy times of the year.

Optional Additions

Description Price
Bead Door
Anneal glass beads in your kiln with the optional double bead doors. Comes complete with a bead mandrel holder.
click here to purchase
Glass Window - 1" x 3"
Watch the bright red kiln interior. (Note: always wear firing safety glasses when viewing the kiln interior.) Conveniently watch your glass treasures progress through every stage of firing!
click here to purchase
Lid Safety Switch
The optional lid safety switch turns off power to the heating elements when the lid is raised. It mounts to the back of the lid.
click here to purchase
Furniture Kit - Order Number F16FK
15" x 15" Kiln Shelf and 5 kiln posts to support shelf
click here to purchase
Kiln Shelf for this kiln - 15" x 15" $26
click here to purchase

Fusion 14 Bead Door Option
Bead Door

Fusion Window - Paragon
F Window

Lid Safety Switch - Paragon
Lid Safety Switch


F16 Glass Fusing Kiln

F16's square digital glass kiln operates on a 120 volt outlet. Its square firing chamber makes it ideal for fusing glass tiles.

You can also fire small glass bowls, pendants, earrings, cufflinks, and even bracelets. Try out the newest glass techniques taught in seminars and books. Enjoy making stunning dichroic glass jewelry. Make gifts that your friends will treasure. When you own a F16 , you can endlessly experiment with glass fusing.

The F-16 heats from the top for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves. The elements do not need pins, because the element coils are wider than the groove opening.

Optional Ceramic Fiber Top

The standard F-16 comes with an insulating firebrick top. You can also upgrade your kiln with the optional deluxe ceramic fiber top, which also has pin less element grooves. The fiber top helps keep the kiln interior even cleaner. The fiber lid is a result of our search for better ways to make kilns.

Reliability at the Heart of the Kiln The F-16 has a two-year warranty. The temperature sensor, called a thermocouple, is covered with high-nickel stainless steel sheath for long life. A heavy steel base supports the reversible brick bottom. These features are extra assurance that your F16 kiln is built to last. No extra stand is needed.

The reliable F-16 has two mechanical relays for long life. (The relays turn on the heating elements after receiving a signal from the digital controller.) The two relays in the F-16 last longer than the single relay of competitive kilns, because less amperage goes through the dual relays of the F-16.

In addition, you can order the mercury relay upgrade for your new kiln. The mercury relays are ordinarily found only on industrial kilns. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.

Convenient Features For your convenience, flip the switch on the front panel to turn off power to the controller when the kiln is not in use.

An 18" tall stand comes standard on the F-16. This stand raises the kiln to a comfortable height for loading and operation.

The F-16 control box has a durable high temperature, water-base finish. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

Optional Glass Window and Bead Door Beginners and even experts love the optional high temperature glass window. Watch every stage of fusing as your pieces begin to glow orange and then progress from tack fuse through full fuse. Watch the glass to fine-tune a digital program. (Always wear firing safety glasses while watching the glass through the window.)

You can even anneal glass beads with your F-16. Order the optional bead door, which mounts to the front of the kiln. Use your kiln to safely cool even large, ornate beads through the annealing range.

Shipping Disclaimer

We require that the shipping costs for all orders including kilns be calculated by
our customer service representatives; the shipping that you are quoted in check
out may not necessarily reflect the actual shipping cost of the kiln, as kilns must
be shipped separately. You will be contacted by one of our customer service
representatives once your order has been processed and your shipping costs
have been figured accurately.


Kiln Type

Top Loading Square



Understanding Chamber Measurements

Chamber Volume

0.96 CU.FT.
27.18 litres

Chamber Length

16.00 IN
406 mm

Chamber Width

16.00 IN
406 mm

Chamber Depth

6.50 IN
165 mm

The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

29.50W x 24.00D x 34.50H Inches
749W x 610D x 876H mm

The external kiln height includes a 18.5" tall stand.

Ship Size

36.00W x 33.00D x 21.00H Inches
914W x 838D x 533H mm

Ship Weight

165.00 Lbs.
74.84 Kg.

Doorway Clearance Needed

29.50 Inches
749.30 mm

Max. Temperature










Breaker Size


Circuit Wire Size

12 gauge

TUV tested to CSA and UL Standard 499








IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

Ship Method & Notations

This Kiln Ships Via Truck

Register Account | Login
View Account | Logout
Shopping Cart
Secure Shopping
Secure Checkout
New Stuff And Sales!
Clearance Items!

Home | About Us | Store Locator | Wholesale Qualifications
Order | Employment Opportunities
Contact Us | Sitemap

Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-641-6262  |