Order Now
Glass Fusing and Slumping Supplies
High Temperature Gloves
| Glove Pictured on Left | Gloves Pictured on Right | |
| Material | Kevlar and Nomex | Kelvar |
| Max Temp | 480 Deg F | 800 Deg F |
| Dexterity | Soft, Thin and Moveable | Rigid, Stiff and Thick |
| Quantity | One Glove - Fits Either Hand | Pair of Left and Right |
| Length | 10" | 13" |
| Item Number | 1888 | 1889 |
| Price | Buy 1 $20ea.
Buy 2 $18ea. Buy3 $16ea. Buy 4 $14ea.
Qty:
|
$47
|
Made from Kevlar and or Nomex, the same material that fire fighter's flame resistant clothing is made from.
- Remember The temperature rating is how hot before the fibers begin to break down. It does not mean you can indefinitely hold an 800 degree item, the heat will slowly penetrate and heat up until you can no longer hold it. It dramatically extends the time you handle hot objects. Also Perfect for the kitchen, barbecue, changing a light bulb, or anywhere you need to get a sure grip on a hot object!
Stressometer
Item #4815
Item #4815
This device is used to check and see if
there are any stress cracks in your glass from firing two
glasses together that may not be compatible. This tool comes
with a diffusing lens, two polarized sheets and complete
instructions. You supply the light source. The best source is a
battery lantern available from a hardware store, but you can use
any light source.
$19.95
$19.95
Quantity:
Glass Rakes
For raking or manipulating molten glass in a kiln.
Ends are angled and have sharpened tips.
Ends are angled and have sharpened tips.
 |
18 Inches Item #4965 |
$20
|
 |
40 Inches with loop handle Item #4966 |
$30
|
Open Weave Sand PaperThis excellent tool is used to remove kiln wash from your kiln shelves or molds. The open weave design prevents kiln wash from building up and clogging your sand paper.
4" x 11" # 4817
Click HereReaching Pliers
Reach far into your kiln to put in or remove items. Also great for picking up and working with hot items! Serrated tips, helps grab your item. 11"
| Item# | Price | |
 |
5546 |
|
 |
5547 |
|
Powder SifterMakes applying power easier and more uniformly.
Set of two. A 2" and a 1-1/4".
And tip of the day... the handle is twisted wire...so... take a
butter knife and scrape along the handle which makes it
vibrate...and watch the magic. Second tip... buy more or many so if
you are doing a project with a half dozen colors...you don't have to
continually clean them.
Buy One Pair Pay
$11.95 Each
Buy Two Pair Pay $11.35 Each
Buy Three Pair Pay $10.76 Each
Buy Four Pair Pay $10.16 Each
ITEM NUMBER 48440 - $11.95
Enter quantities in cart. Discounts will show on cart.
Qty:
Haik BrushThe perfect soft bristle brush for applying kiln wash separator. Any bristles that fall off onto the
kiln wash surface will not cause any problems. 2" wide.
Coat kiln shelves and all surfaces that would come in contact with glass with kiln wash.
| Item# | Width (Inches) | Width (MM) | Price | |
 |
5817 | 2" | 48mm |
Buy 1 pay $4.00 ea. Buy 2 pay $3.60 ea. Buy 4 pay $3.20 ea. Buy 8 pay $2.80 ea.
Qty:
|
 |
5818 | 3-1/4" | 80mm |
Buy 1 pay $5.00 ea. Buy 2 pay $4.50 ea. Buy 4 pay $4.00 ea. Buy 8 pay $3.50 ea.
Qty:
|
 |
5819 | 5-1/2" | 140mm |
Buy 1 pay $7.00 ea. Buy 2 pay $6.30 ea. Buy 4 pay $5.60 ea. Buy 8 pay $4.90 ea.
Qty:
|
Diamond PadsDiamond hand pads
These Diamond Hand Pads are extremely useful. Always use with water to preserve the diamond grit and the glass.
If you don't have a diamond grinder machine you need these!
Even if you do have a diamond grinder, you will like these because they are so quick and easy!
You can take off any rough edges before or after firing your glass with just a few quick passes with these pads. You can even use the different grits to smooth it out. These will also allow you to hand finish your work. Each 2-1/4" X 3-1/4 X 1-1/4. The Larger the grit number the smaller the diamond (smoother).
| Item# | Grit | Price | |
 |
66060 | 200 Grit |
Buy One $18.95ea Buy Two or Three $17.06ea Buy Four or more $15.16ea
Qty:
|
 |
66120 | 120 Grit | Buy One $18.95ea Buy Two or Three $17.06ea Buy Four or more $15.16ea
Qty:
|
 |
66200 | 60 Grit | Buy One $18.95ea Buy Two or Three $17.06ea Buy Four or more $15.16ea
Qty:
|
|
|
66400 | 400 Grit | Buy One $24.95ea
Buy Two or Three $22.46ea Buy Four or more $19.96ea
Qty:
|
 |
66003 | 60, 120, 200 | This is a Set of 3
Diamond pads one of each grit (all but 400 grit) $51.17
|
 |
66004 | 60, 120, 200, 400 | This is a Set of 4
Diamond pads one of all four grits $76.12
|
Diamond Grinder Bit for Wire Wrapping GlassUse this bit on your diamond grinder. It puts a thin groove in the edge
of the glass piece. A wire is placed in this grove to "Wire Wrap" your
glass piece and hold the wire in place.
| Item | Thickness | Grit | Reg price | Our Reg Low Price | Our Sale Price | |
|
|
4443 | 1 mm Thin Grove |
220 Medium Rougher finish but faster cutting |
$31.95 | $24.00 | Buy 1 $19.00 ea. Buy 2 $18.05 ea. Buy 4 $17.00 ea.
Quantity:
|
|
|
4444 | 1 mm Thin Grove |
360 Fine Smoother finish but slower cutting |
$31.95 | $24.00 | Buy 1 $19.00 ea. Buy 2 $18.05 ea. Buy 4 $17.00 ea.
Quantity:
|
|
|
4445 | 1.4 mm Wider Grove |
220 Medium Rougher finish but faster cutting |
$31.95 | $24.00 | Buy 1 $19.00 ea. Buy 2 $18.05 ea. Buy 4 $17.00 ea.
Quantity:
|
|
|
4446 | 1.4mm Wider Grove |
360 Fine Smoother finish but slower cutting |
$31.95 | $24.00 | Buy 1 $19.00 ea. Buy 2 $18.05 ea. Buy 4 $17.00 ea. Quantity:
|
Scribe to sign your glass pieces. Also engrave item numbers, or name of your glass
pieces. Has a hard Tungsten Carbide Tip. Also works on many other materials like
stone or plastic. Scribe ID on your TV or valuables.
# CSP $7.95
pieces. Has a hard Tungsten Carbide Tip. Also works on many other materials like
stone or plastic. Scribe ID on your TV or valuables.
# CSP $7.95
Quantity:
Polishing System
Item #5702
Removes small scratches from glass. Also removes devitrification - but
with a bit of effort. Use Pumice first to grind away more glass. It will
leave a slight haze. Finish by using Cerium Oxide which leaves a glossy surface finish. You must use a different polishing wheel for each abrasive.
Do not cross contaminate. If you want to use both polishing compounds,
you will need to order two.
with a bit of effort. Use Pumice first to grind away more glass. It will
leave a slight haze. Finish by using Cerium Oxide which leaves a glossy surface finish. You must use a different polishing wheel for each abrasive.
Do not cross contaminate. If you want to use both polishing compounds,
you will need to order two.
Mount the polisher on a drill. 1/4" shaft.
Make a paste with water. Apply paste to the polishing wheel.
Work wheel against glass. Too fast a speed throws the paste off
the wheel. Remember, you would need to polish to the bottom of
a scratch to remove the scratch completely, so it doesn't work
fast for deeper scratches. Also works for devitrification with
a bit of effort. The 5716 bottles store the polishing wheel.
Use another one to mix and store the polishing paste.
Item#
Description
Price
5701
Glass Polishing System
Includes: two polishing wheels, 4 oz bottle of cerium oxide and a 4 oz bottle of pumice, and 4 storage and mixing bottles
$39.00
Quantity:
5702
Felt Polishing Wheel 2"
$12.00
Quantity:
5704
Cerium Oxide 4 OZ *
Use after Pumice for high polish
$9.75
Quantity:
5705
Pumice 4 OZ *
Use first - More Abrasive than cerium oxide
$9.75
Quantity:
5716
Empty Container with lid
Mixing and storage containers
16 Oz
16 Oz
$1.25
Quantity:
* a container is 4 Oz. by volume
High Temperature Kiln Wire
Holds up to the high temperatures of a kiln. Make a loop to hang glass by placing
looped wire between layers of glass, great for the loop to hang fused glass jewelry, many other uses too! (The smaller the gauge (ga.) number the thicker the wire)
FireBrick
Soft brick can be shaved, caved and cut into most any shape for custom molds. Coat
with Shelf Primer. This insulating fire brick is also used to make or repair kilns. Limit is
2300 degrees F (1260 deg C) 2-1/2" x 4-1/2" x 9"
Plastic Stacking Storage Boxes
Great storage for glass, powders and frits, small parts, jewelry findings...etc.... Stacking
and locking or use individual. Available
in 3 sizes. All sold by the package.
Protect you eyes and lungs with appropriate protection. Crushing glass produces dust you shouldn't be breathing. Don't' want to go to the trouble of crushing your own glass? We sell pre crushed glass called FRIT. When FRIT is very small it is called powder.
Holds up to the high temperatures of a kiln. Make a loop to hang glass by placing
looped wire between layers of glass, great for the loop to hang fused glass jewelry, many other uses too! (The smaller the gauge (ga.) number the thicker the wire)
| Description | Length | Price | |
 |
24 Ga .020" Item# 450424 |
10 Feet |
$5.00
Quantity:
|
|
|
17 Ga .045" Item# 450417 |
10 Feet |
$6.00
Quantity:
|
 |
15 Ga .057" Item# 450418 |
10 Feet |
$6.00
Quantity:
|
FireBrick
Soft brick can be shaved, caved and cut into most any shape for custom molds. Coat
with Shelf Primer. This insulating fire brick is also used to make or repair kilns. Limit is
2300 degrees F (1260 deg C) 2-1/2" x 4-1/2" x 9"
| Item Number | Description | Price |
| 4832 |
Fire brick - 2-1/2 by 4-1/2 by 9" |
$4.00
Quantity:
|
| 4834 | Brick Cement - 16 Oz Container |
$10.00
Quantity:
|
Plastic Stacking Storage Boxes
in 3 sizes. All sold by the package.
| Item # | Diameter | Pieces per Package | Price |
Price
|
| 7742 | 2" | 8 | $2.40 |
Quantity:
|
| 7743 | 2-1/2" | 6 | $2.40 |
Temp Out of Stock
|
| 7744 | 2-3/4" | 4 | $2.40 |
Quantity:
|
Glass Crusher
(Item #1414)
Notice the machined tip. A flat end tends to crush to powder. Our machined tip helps produce more of those medium sized particles that are desirable. Two piece set, 4" stainless cup and A 10" hand held glass crusher (Note, there is no handle on the crushing rod).Protect you eyes and lungs with appropriate protection. Crushing glass produces dust you shouldn't be breathing. Don't' want to go to the trouble of crushing your own glass? We sell pre crushed glass called FRIT. When FRIT is very small it is called powder.
$26.00
Quantity:
Quantity:
|
Clear Face Shield Item #75400 This clear face shield protects against flying glass and debris and keeps the face cooler when opening a hot kiln.
|
|
Shade 3 Face Shield Item #75403 This shade 3 shield protects against UV & IR rays, flying glass and debris and keeps the face cooler while opening a hot kiln. This protective shield is ideal for the image conscious, or those who simply don't want to be sunburned by their kiln or torch. Glasses offer only eye protection, whereas this shield offers full-face protection.
|
  |
Fusers Safety Glasses
(Shade 2) Item #9092 Used when viewing inside a hot kiln. Blocks most of the UV (Ultraviolet) and IR (Infrared) harmful light that is emitted by kilns. These glasses are called fitovers, a large frame that will fit over most prescription glasses under 132mm (that's 5-1/8" wide). This special Shade 2 filtering lens permits good visibility while still maintaining good protection.
|
