Glass Fusing and Slumping Supplies
High Temperature Fusing Gloves
These heavy duty gloves are priced and sold by the pair. These gloves are great when you want to pick up hot glass or open up your kiln while it is in the fusing process. Temperature rating 800 to 1100 degrees F. The temperature rating is the temperature the material starts to break down. It does not mean you can hold an 1100 degree object indefinately. The heat will slowly penetrate the material until it is to hot to handle. This is true for any glove.
Title
Description
Size
Price
48111
Mitt
11"
$44.00
48114
Mitt
14"
$49.00
48211
Gloves
11"
$59.00
48214
Gloves
14"
$65.00
48223
Gloves
23"
$99.00
Click Here to see
Glass Cutting Tools
Hot Glove (one glove) - Item# 1888 - $19.00
Made from
Kevlar and
Nomex, the
same material that fire fighter's flame resistant clothing is made from. It can withstand temperatures of up to 480 degrees F. You can dramatically extend the time you handle hot objects.
Single Glove.
- Comfortable five-fingered flexi-grip construction
- Fits both left or right hand
- Withstands extreme heat up to 480 degrees
- Great Dexterity
- Holds hot glass. Also Perfect for the kitchen, barbecue, changing a light bulb, or anywhere you need to get a sure grip on a hot object!
Stressometer - Item# 4813 - $41.95
This device is used to check and see if there are any stress cracks in your glass from firing two glasses together that may not be compatible. This tool comes with a diffusing lens, two polarized sheets, a light source, battery and complete instructions.
Place an order now.
Glass Rakes
For raking or manipulating molten glass in a kiln.
4966
40 Inches with loop handle
$30
Ends are angled and have sharpened tips.
Open Weave Sand Paper
Sometimes called Fabricut, this excellent tool is used to remove kiln wash from your kiln shelves or molds. The open weave design prevents kiln wash from building up and clogging your sand paper. Can be cut down with scissors.
Place an order now.
Item#
Size
Price
4817
4" x 11"
$5.00
Reaching Tongs
#5545 Reach far into your kiln to put in or remove items. Also great for picking up and working with hot items! Serrated tips, helps grab your item. Locks when closed. All stainless steel.
Item#
Description
Size
Price
5544
Reaching Pliers
11" overall
$14.00
Haik Brush
The perfect soft bristle brush for applying kiln wash separator. Any brissles that fall off onto the kiln wash surface will not cause any problems. 2" wide.
Coat kiln shelves and all surfaces that would come in contact with glass.
Item#
Width (Inches)
Width (MM)
Price
5817
2"
48mm
$4.00
5818
3-1/4"
80mm
$5.00
5819
5-1/2"
140mm
$7.00
Diamond Grinder Bit for Wire Wrapping Glass
Use this bit on your diamond grinder. It puts a thin grove in the edge of the glass piece. A wire is placed in this grove to "Wire Wrap" your glass piece and hold the wire in place.
Item# 4444 - $24.00
Scribe Pen
- Item# CSP - $7.95
Scribe to sign your glass pieces. Also engrave item numbers, or name of your glass pieces. Has a hard Tungsten Carbide Tip. Also works on many other materials like stone, plastic. Scribe ID on you TV or valuables.
Fluid Writer Pen
Fill cup with acryllic inks or liquid gold. Good for detail work on glass, includes wire plunger tip cleaner.
Enlarged signature using Gold Pen and LG2 liquid gold, after kiln firing.
Item#
Description
Size
Price
4982GPS
Gold Pen
Small
$12.00
4982GPL
Gold Pen
Large
$12.00
4982FWP
Fluid Writer Pen
$12
Liquid Gold (for use in above pens)
Two gram bottle. Paint on you finished bead or use the above pens and fire in you kiln to 1100 degrees F. The White gold is the "silver" color.
Item#
Description
Price
LG2
Liquid Gold
$15.50
LWG2
Liquid White Gold
$15.50
Glass Engraver
This low cost engraver works great. We were engraving all sorts of things with this electric diamond engraver. We signed name on glass pieces, engraved ID numbers on VCRs and other valuables. See the name signed on the green piece of glass in the picture. Two different size diamond tips. Battery included.
Item#
Description
Price
82923
Diamond Engraver
$5.00
Gold, Silver, and Palladium
Very thin squares of the real thing. Don't be fooled with the commonly available inexpensive leaf that is only colored aluminum. Place small pieces of this metal on top or in between layers of glass. A single sheet of leaf barely shows up. Experiment with multiple sheets and the thicker sheets to get the effect you like. Aproximate Sheet Sizes are 3-3/8" to 3-3/4" Square.
You can see that a single layer shows well.
This glass was full fused to 1500 degrees F.
This gold leaf has an **Average weight of 65g/1000 leaves
Item#
Metal
# of sheets
Price
16502
Silver Leaf (very thin)
25
$9.50
16503
Heavy Silver Leaf (medium thickness)
25
$19.00
GL25
22Kt Gold Leaf (very thin)
25
$39.00
16522
23Kt Silver Leaf (medium thickness**)
10
$54.00
PL25
Palladium Leaf (thin)
25
$89.00
Polishing Wheel
Removes small scratches from glass. Also removes devitrification - but with a bit of effort. Use Pumice first to grind away more glass. It will leave a slight haze. Finish by using Cerium Oxide which leaves a glossy surface finish. You must use a different polishing wheel for each abrasive. Do not cross contaminate. If you want to use both polishing compounds, you will need to order two of item# 5702.
Mount the polisher on a drill. 1/4" shaft.
Make a paste with water. Apply paste to the polishing wheel.
Work wheel against glass. Too fast a speed throws the paste off
the wheel. Remember, you would need to polish to the bottom of
a scratch to remove the scratch completely, so it doesn't work
fast for deeper scratches. Also works for devitrification with
a bit of effort. The 5716 bottles store the polishing wheel.
Use another one to mix and store the polishing paste.
Item#
Description
Price
5701
Glass Polishing System
Includes: two polishing wheels, 4 oz bottle of cerium oxice and a 4 oz bottle of pumice, and 4 storage and mixing bottles
$39.00
5702
Felt Polishing Wheel 2"
$12.00
5704
Cerium Oxide 4 OZ *
Use after Pumice for high polish
$5.00
5705
Pumice 4 OZ *
Use first - More Abrasive than cerium oxide
$5.00
5716
Empty Container with lid
Mixing and storage containers - 16 Oz
$1.25
* a container is 4 Oz. by volume
Jewelry Glue
A Great Glue to hold glass to glass or metal to glass. Great for
gluing metal jewelry findings to fused glass, like barretts or
pins. Doesn't work as well for projects with a small surface
area like earing posts. Feels and works like Clear RTV (silicone
ruber). 3.7 Fl. Oz.Item# 6000 - $5.00
High Temperature Kiln Wire
Holds up to the high temperatures of a kiln. Make a loop to hang glass by placing looped wire between layers of glass.
Item#
Description
Size
Price
450424
24 Ga .020"
10 Feet
$5.00
450417
17 Ga .045"
10 Feet
$6.00
450418
15 Ga .057"
10 Feet
$6.00
FireBrick
Soft brick can be shaved, caved and cut into
most any shape for custom molds. Coat with Shelf Primer. This
insulating fire brick is also used to make or repair kilns. Limit
is 2300 degrees F (1260 deg C) 2-1/2" x 4-1/2" x 9"
Item#
Description
Price
4832
Fire brick - 2-1/2 by 4-1/2 by 9"
$4.00
4834
Brick Cement - 16 Oz Container
$10.00
Plastic Stacking Storage Boxes
Great storage for glass, powders and frits, small parts, jewelry findings...etc.... Stacking
and locking or use individual. Available in 3 sizes. All Sold by the Package
Item#
Diameter
Pieces per Package
Price
7742
2"
8
$2.40
7743
2-1/2"
6
$2.40
7744
2-3/4"
4
$2.40
Order Now
Catalogs
inland SwapTop Shaper/Grinder
New Book, Beginners Guide To Kiln Formed Glass!
