Order Now
Supplies for Glass Fusing and Slumping
Kiln Wash Separator
A High temperature, low fluxing clay and alumina
mixture in a special formulation. Contains suspension agents, that when used correctly, will be the best insurance that your
fused work will not stick to the shelf. Coat kiln shelves and all surfaces that would come in contact with glass.
How to apply kiln wash, separator, shelf primer.
| Order # | Brand | Qty | Price |
| 4819 | Hot Line Shelf Primer | 24 OZ | $7 |
| 48195 | Hot Line Shelf Primer | 5 Pounds | $15 |
| 48321 | Hot Line-Hi Temp* | 24 Oz | $7 |
| 483215 | Hot Line-Hi Temp* | 5 Pounds | $15 |
| 48235 | PRIMO PRIMER | 24 Oz | $7
|
| 48230 | PRIMO PRIMER | 5 Pounds | $15
|
| 8220 | Bullseye List $27.85 | 5 Pounds | $24.95 |
Fired on Decal Paper
For the first time, home hobbyists, professional studios, schools and artists can easily, safely and inexpensively fire high quality photographs, graphics and text onto their fused glass projects.
For more information Click Here
 |
Book/ Fusing Images on Glass/ 2nd
Edition: Item Number 79082 |
List Price: $19.95 Our Low Price: $17.95 |
 |
Fired-On Photo Fusing Decal Paper: Item Number 79081 |
List Price: $19.95 Our Low Price: $17.95 |
Thin Fire" Shelf Paper
Wow! No more coating kiln shelves. Simply use scissors to cut out a size to fit your kiln shelf,
place glass and fire! This "Thin Fire" shelf paper
leaves a smoother finish on the back of the glass than shelf
primer! One time use. It has the annoying feature of rising
up off the shelf in the uncovered areas and sometimes curling
back on to your glass piece. Weigh down the uncovered areas with
kiln posts or scrap glass. More about Thinfire shelf paper
| Order Number |
Thin Fire Shelf Paper: Sheets |
Minimum order | Price |
| TF20 | Thin Fire Paper - 21" x 21" sheet | 4 sheets | $3 per sheet |
| TF20100 | Thin Fire Paper - 100 sheet pack | 1 pack | $200 |
| Order Number | Thin Fire Shelf Paper: From the Roll |
Minimum order | Price |
| TF9 | Thin Fire - Priced by the linear foot - order any length over 6 feet - we will cut a 9" wide continuous strip off a roll. That's .75 square feet of paper for every foot you order off the roll. | 6 foot minimum | $1.30 per linear foot Quantity:
|
| TF13 | Thin Fire - Priced by the linear foot - order any length over 6 feet - we will cut a 13" wide continuous strip off a roll. That's 1.66 square feet of paper for every foot you order off the roll. | 6 foot minimum | $1.90 per linear foot Quantity:
|
| TF16 | Thin Fire - Priced by the linear foot - order any length over 6 feet - we will cut a 16" wide continuous strip off a roll. That's 1.66 square feet of paper for every foot you order off the roll. | 6 foot minimum | $2.30 per linear foot Quantity:
|
| TF3 | Thin Fire - Priced by the linear foot - order any length over 6 feet - we will cut a 20" wide continuous strip off a roll. That's 1.08 square feet of paper for every foot you order off the roll. | 6 foot minimum | $2.95 per linear foot Quantity:
|
| Order Number | Thin Fire Shelf Paper: Full Rolls |
Minimum order | Price |
| TF25007 | Thin Fire - One full roll - 7" by 250 feet long This Roll is 20% off the list price! |
1 Roll | List
Price $157 Our Price $126 |
| TF25009 | Thin Fire - One full roll - 9" by 250 feet long This Roll is 20% off the list price! |
1 Roll | List Price $203 Our Price $162 |
| TF25013 | Thin Fire - One full roll - 13" by 250 feet long actual width is a little less than 13" by about 3/8" This Roll is 20% off the list price! |
1 Roll | List Price $293 Our Price $220 |
| TF25016 | Thin Fire - One full roll - 16" by 250 feet long actual width is a little less than 16" by about 3/8" This Roll is 20% off the list price! |
1 Roll | List Price $361 Our Price $252 |
| TF25020 | Thin Fire - One full roll - 20-1/2" by 250 feet long This Roll is 20% off the list price! |
1 Roll | List Price $462 Our Price $277 |
| TF25041 | Thin Fire - One full roll - 41-1/2" by 250 feet long This Roll is 20% off the list price! |
1 Roll | List Price $925 Our Price $508 |
**Note: the 41" roll needs to be shipped in a long box - often its own box if ordered with other items - plus UPS charges a bit more for shipping this longer box.
Click Here to see more Fiber Paper and Blanket Products
Super Spray Over glaze
A clear, low-melting glass suspended in a spray medium. This material is applied to fused projects when they are ready for firing to prevent devitrification on the glass surface.
Super Spray
Prevents surface divitrification on kiln fired glass. Ultra low melting glass suspended in a solution compatible with most glass. 99% lead-free. Has been proven safe for food-bearing surfaces. Can be used on dichroic or irridized surfaces. Will not discolor reds, oranges or other sensitive colors.
| Order # | Description | Quantity | Price |
 |
Super Spray #4827 |
8 Oz. | $24.95 |
 |
Super Spray #4827Q |
32 Oz. | $59 |
Squeegee Oil
This is a medium used to apply enamels and fine frits, acting as an adhesive that burns off at a relatively low temperature. Apply oil to selective areas, sprinkle frit or powder on the glass, the frit sticks just to the oil areas, the rest of the frit is easily removed leaving frit in your design pattern.
| Order# | Description | Quantity | Price |
 |
Squeegee Oil #4825 |
8 Oz. | $19 |
Bending Glaze
Matures at 1100 deg. Can be brushed
or sprayed onto surface of glass or on ground edges to prevent
devitrification during the slumping cycle. Ideal for single layer
bending. NOT safe for food bearing surfaces!
| Order # | Description | Quantity | Price |
| Bending Glaze #4847 |
4 Oz. | $17 |
Back Magic
Increases shine and texture on
the back side of fused pieces. Spray or brush on piece, fire
to 975 deg (well below slumping temp). Will not eliminate texture,
but will make most surfaces more glossy and smooth. For use after
intitial slumping process. This great product has been discontinued by the
manufacture. Get it now before we run out forever| Order # | Description | Quantity | Price |
 |
Back Magic #48471 |
4 Oz. | $27 |
Wash-Away
Easily removes baked-on shelf primer (kiln wash) from the bottom of fused projects, like black glass, hot colors and opalescent glass. Apply witout dilution to the baked-on primer and then lightly scrub with a plastic scouring pad. This should remove even the most stubbornly adhered primer.
| Order # | Description | Qty | Price |
 |
Wash Away #522010 |
8 OZ | $6 |
Fusing Glue
GlasTac Glue For holding glass layers, stringers & fractures in
place while assembling for fusing.
| Order # | Quantity | Price |
| 8234 | 4 Oz. | $9.75 |
| 8232 | 32 Oz. | $19.50 |
Glass Glue
E6000 Glue - Great glue for glass to glass. Also Great for gluing metal jewelry findings to fused glass, like barrettes or pins.
Has a rubber
constancy. Feels and works like Clear RTV (silicone rubber).
The
UV6800 Glue holds up better to the ultraviolet radiation from the sun and is for outdoor applications
like garden stands, wind chimes, etc.
Tip allows you to control the application amount
dispensing a smaller amount.| Order # | Quantity | Price |
| E6000 | 3.7 Fl. Oz. | Buy one pay $5.00 Buy 12 or more pay $4.35
Qty:
|
| E6800UV | 3.7 Fl. Oz. | Buy one pay $7.00 Buy 12 or more pay $5.65
Qty:
|
| E6000Tip | one | Buy one pay $0.39 Buy 12 or more pay $0.33
Qty:
|
CMC
Used for many purposes. A common usage is to apply a thick line of powdered frit mixed with CMC using an applicator bottle. This is described in Richard LaLonde's Book by his name. Safe - it's a food additive. You could see it on the list of tortilla ingredients.
Click Here to see his book.
| Order # | Quantity | Price |
| 48260 | 4oz | $5 |
| 18261 | 1 pound | $14.95 |
Directions:
Add 1 tablespoon CMC to 2 cups distilled water (a little bit goes a long way). Don't forget to always wear a mask when working with any powder. Stir and let sit overnight. To create a "glass clay", add powdered glass to the mixture. Fill a squeeze bottle with this "glass clay". Now squeeze out a line . You can effectively "draw with it". If it's to thick - it won't come out of the bottle easily - just add some water. To thin and the drawn line will flow and flatten and won't hold its shape or height - just add more powder.
Calcium Carbonate
Used for many purposes. A common usage for fusing is to make a paste using water, squirt through a cake frosting decorator applicator on to the kiln shelf to make a design. When completely dry, glass is placed on top and then melted over the raised design to make a textured design on the bottom of the finished glass piece. Another material used for the same purpose is fiber paper, shown near the top of this page.
Item Number CaCo
3 Pound Bag - $8.50
Bubble Maker
Create bubbles in your glass. Sprinkle even a TINY amount between layers of glass, fire and magically bubbles will form.
A bit hard to control the size of bubbles. A little bit goes a long way. Non toxic.
Item Number 8233
Powder in a 2 Fl Oz container - $4.50
Gold, Silver and Palladium
Very thin squares of the real thing. Don't be fooled with the commonly available inexpensive leaf that is only colored aluminum. Place small pieces of this metal on your graphite marvering pad and roll your bead across it to pick it up. Be careful, the direct flame will melt away the metal. Cover the metal with dabs of transparent glass. Approximate Sheet Sizes are 3-3/8" to 3-3/4" Square.
| Order # | Metal | # of sheets | Price |
|
12700 |
Copper Leaf (very thin) sheet size 5-1/2" sq. |
25 |
$9.50 |
| 16502 |
Silver Leaf (very thin) |
25 | $11.50 |
| 16503 | Heavy Silver Leaf (medium thickness) -a thin Foil* | 25 | $25.50 |
| 16501 | Gold Leaf 22Kt Very Thin | 25 | $74 |
| 16522 | Gold Leaf 23Kt Medium Thick** | 10 | $88 |
This is actually Heavy Leaf or Thin Foil
**Average weight of 65g/1000 leaves
The 16522 leaf is used in the pictures. You can see that a single layer shows well. This glass was full fused to 1500°F.
Copper Foil Sheet
Copper foil is a great way to incorporate designs inside of fused glass projects. This thin foil is easy to cut with a scissors. Seems to work with wide variety of glass. Does not work on top of the glass - must be placed between layers of glass. Copper will darken due to oxidation.
| Metal | Order. No. | Thickness | Size | Price |
| Copper Foil Sheet | 12701 | .002" | 2" x 50 ft. | $55 |
Luster Powders
Add a unique element to your fused glass projects. Luster powders are high temperature
minerals. It actually never melts but just sticks to the molten
glass, and therefore has minimal compatibility problems and works
for all kinds of glass, hard or soft. Put on top of glass before
fusing. After fusing some will be stuck to the glass surface.
Brush off what did not stick for later use. Packaged and priced by 25 gram lots.
| Order No. | Finish | Color | Price |
| LSG25 | Sparkle | Gold | $3 |
| LSC25 | Sparkle | Copper | $3 |
| LSW25 | Sparkle | White | $3 |
| LSDG25 | Sparkle | Dark gold | $4 |
| LSR25 | Sparkle | Red | $4 |
| LSS25 | Sparkle | Silver | $5 |
| LST25 | Sparkle | Teal | $6 |
| LSP25 | Supersparkle | Clear | $3 |
| LHR25 | Hi-Lite | Red | $4 |
| LHB25 | Hi-Lite | Blue | $4 |
| LHG25 | Hi-Lite | Green | $4 |
| LHL25 | Hi-Lite | Gold | $4 |
| LHV25 | Hi-Lite | Violet | $4 |
