Eyewear Eye Protection Glasses for
Glassworkers, Lampworkers, Beadmakers


We offer the highest quality filtered glass lenses designed for the glass worker. You no longer have to pay those high prices for frames from that other company. Most all of the filtering lenses available anywhere comes from the same factory in Germany. So the only difference between where you buy your glasses is: the style of the frame and how much you pay. We also sell many didymium glasses to Blacksmiths.
didymium-green-ACE-IR-202-lampworking-glassblowing-safety-glasses
Fit Over Style fits over most prescription glasses
didymium-green-ACE-IR-202-lampworking-glassblowing-safety-glasses
The below only applies to the Green Ace IR's
Most glasses come in a Shade 3 or a Shade 5.
But the visibility is almost the same between a shade 3 and a shade 5 for these Green Ace IR's.
So why not just get the Shade 5 which has more protection and almost the same good visibility.

To help you decide on the level of safety you require Click Here to go to the government NIOSH report.

Filtering  Lenses for Lampworkers

Color of frame may vary

choose-didymium-lampworking-glassblowing

Didymium 202ACE Lens Green ACE IR
didymium-green-ACE-IR-202-92-lampworking-glassblowing-aura-phillips
9307    $74
Didymium 202ACE Fit Over
This large stylish rubberized frame can go over most prescription glasses! Click here to see how fit over works.
  didymium-green-ACE-IR-202-92-lampworking-glassblowing-aura-phillips
9309    $129
Green ACE IR   Shade 5
Fit Over
This large stylish rubberized frame can go over most prescription glasses! Click here to see how fit over works.

Four Basic Types of Glasses
lampwork-glassblowing-eye-protection-glasses lampwork-eye-protection-glasses 921B Boroscope Lens Rec Specs MAXX Silver Frame Glasses
Rose Didymium
We and no one carries anymore, there are a lot better glasses out here.
Enhanced Didymium
MMore of the Didymium (we carry 202ACE) standard glass workers glasses, blocks bright yellow flare, but not much UV and no IR.
Most soft glass beadmakers use this filtering lens.

Not sure how much protection you require? Click Here to see a NIOSH report.  Read Discussion and Conclusion and Recommendations at bottom of report.
A Shade 2, 3 or 5 Lens
Blocks UV and IR, but not the filtering of the bright yellow flare found in didymium, you may still need didymium. Three ways to add this UV and IR protection to your didymium glasses

1) Clip on - see the above picture.

 2) Fitover - large frames fits over other glasses.glassblowers-eye-protection-safety-glasses
3) Or use the Green ACE IR pictured to the right, it does it all in one.

What's the difference between Shade 2, 3 or 5? Click Here to see a chart of the differences. You will notice minimal difference in UV and IR protection between shades but a whole lot of reduced visibility as the shade darkens. In other words - do you want to give up a lot of your visibility for just a little more protection? This is a decision you need to make.
Green ACE IR
Formally Boroscopes
now replaced by the better strong>Green ACE IR. these glasses does it all, blocks yellow flare, UV and IR. See bottom of this page to see more info about Green ACE IR
Also available in split lens
811s3 Microlight Split Lens Top 1/3 Enhanced Didymium, Bottom 2/3 Shade 3 Boroscope Glasses
Enhanced Didymium (202ACE) on top for better viewing and Green ACE IR on bottom for more protection.

What's the difference between ANSI Shade 3 or 5? Click Here to see a chart of the differences. You will notice minimal difference in UV and IR protection between shades but a whole lot of reduced visibility as the shade darkens. In other words - do you want to give up a lot of your visibility for just a little more protection? This is a decision you need to make.

921B Boroscope Lens Rec Specs MAXX Silver Frame GlassesMMore about GreenACE IR formally Boroscopes
Green ACE IR/span> are designed to meet the need for the extra UV and IR protection needed when working on borosilicate glass. Green ACE IR are specially formulated glass filter lenses that the manufacture exclusively owns. These lenses have been developed for the lampworking and glassblowing markets. This revolutionary product is greatly lighter than conventional laminated products and comes in a full coverage lens which is a higher quality design because there are no areas without shading. Green ACE IR should be worn when working on hard glass types where regular didymium lenses are not adequate due to the fact of insufficient filtration of ultra violet and infrared absorption.
Liability Disclaimer:
We are not optometrists and can only make suggestions concerning eye protection. There are many types of eye protection available. The manufacture and Sundance Art Glass does not accept any liability concerning eye damage arising from the use, misuse, or non-use of any eyewear products we sell. We can only recommend the highest level of protection.


Related Products
These are not Didymiums. Usually used in combination with the didymium glasses shown above on this page. Using the below glasses is an inexpensive way to add more protection to the above didymiums. It is common for people working with borosilicate glass, (when the flame is extra bright, or when fuming metals onto the glass) to use the below glass in conjunction with didymium. The below glasses provides good UV and IR protection that Didymiums do not provide. Price
Clip-On Shade 3 and 5 Welding for Glasses #903 - Clip-On Flip Up Shade 3 Glasses
Click here to see it modeled.
 $26
Clip-On Shade 3 and 5 Welding for Glasses #905 - Clip-On Flip Up Shade 5 Glasses
Click here to see it modeled.
 $26
9092-welding-shade-2-lampwork-glassblowing-safety-glasses

didymium-lampworking-glasses-shade-2
#9092 - Shade 2 Glasses
It will Fit over glasses smaller than 132mm that's 5-1/8". The 940 didymium shown up the page fits inside these glass. Others too. Unfortunately the inexpensive 9301's do not fit in this frame.
$24
9092-welding-shade-2-lampwork-glassblowing-safety-glasses

didymium-lampworking-glasses-shade-2
#9093 - Shade 3 Glasses
It will Fit over glasses smaller than 140mm that's 5-3/4". The 940 didymium shown up the page fits inside these glass. Others too. Unfortunately the inexpensive 9301's do not fit in this frame.
$24
9092-welding-shade-2-lampwork-glassblowing-safety-glasses

didymium-lampworking-glasses-shade-2
#9095 - Shade 5 Glasses
It will Fit over glasses smaller than 140mm that's 5-3/4". The 940 didymium shown up the page fits inside these glass. Others too. Unfortunately the inexpensive 9301's do not fit in this frame.
$24
glassblowers-eye-protection-safety-glasses
eyeware-safety-glasses-glassblowing-lampworking
#9100 - Shade2 Glasses
It will Fit over glasses smaller than 127mm that's 5".  Unfortunately the inexpensive 9301's shown up the page do not fit in this frame.
$24


Faceshield. Blocks flying glass and reflects heat
#75400

Faceshield. Blocks flying glass and reflects heat
#75403

Faceshield. Blocks flying glass and reflects heat
#75405

Faceshield. Blocks flying glass and reflects heat
The Animal
Face shield #75400
Visor - Includes:
Clear Shield and Headgear Protects against flying glass but the clear does not block any UV, IR or Yellow Flare - use proper filtering eyewear as usual.
$17
Face shield
Visor - Includes:
Shade 3 Shield and Headgear
Protects against flying glass and the shade 3 blocks lots of the UV and IR (but non of the Yellow Flare, use didymium glasses for that) - use proper filtering eyewear as usual. Also protects the face from sunburn from the flame. Also protection from fuming gold or silver. The metal actually "explodes" and invisible metal shoots off in all directions and into your face. What's the difference between Shade 3 or 5? Click Here to see a chart of the differences. You will notice minimal difference in UV and IR protection between shades but a whole lot of reduced visibility as the shade darkens.
$34
Face shield
Visor - Includes:
Shade 5 Shield and Headgear
Protects against flying glass and the shade 5 blocks lots of the UV and IR (but non of the Yellow Flare, use didymium glasses for that). Remember the darker shade 5 provides more protection than the above shade 3 but is darker to look through. Use proper filtering eyewear as usual. Also protects the face from sunburn from the flame. Also protection from fuming gold or silver. The metal actually "explodes" and invisible metal shoots off in all directions and into your face. What's the difference between Shade 3 or 5? Click Here to see a chart of the differences. You will notice minimal difference in UV and IR protection between shades but a whole lot of reduced visibility as the shade darkens.
$34
Face shield - The Animal
Goggles, Face Mask with head strap
Clear      - #10340 - $24
Shade 3 - #10343 - $34
Shade 5 - #10345 - $34
Not just a face shield, but a 2 piece unit. Lower mask separates from the Goggles! Protects against flying glass and the shade 3 or 5 blocks lots of the UV and IR (but non of the Yellow Flare, use didymium glasses for that) - use proper filtering safety glasses eyewear as usual. Also protects the face from sunburn from the flame. Also protection from fuming gold or silver. When fuming, the metal actually "explodes" and invisible microscopic metal shoots off in all directions at 60 miles per hour imbedding in walls and your in your face. What's the difference between Shade 3 or 5?  Click Here to see a chart of the differences. You will notice minimal difference in UV and IR protection between shades but a whole lot of reduced visibility as the shade darkens.
 


Specials!
Classes
  • Beginning Glass Fusing 1101
    $325 Three day class
    April 16, 17 & 18
    details
  • Intermediate/Advanced
    Glass Fusing 1102
    $325 Three day class
    April 30, May 1 & 2
    details
  • NEW FUSING CLASS
    Green Fusing Class!
    Learn how to fuse glass
    for FREE (almost)
    using recycled glass,
    garage sale glass,
    donated glass, bottles,
    $1 store glass, etc...
    it's amazing how much
    variety and how many
    designs are possible!

    April 24 & 25
    $325
    details
  • Glassblowing
    with a Torch - $295
    April 10, 11
    details
  • Welding and Metalmaking
    for display stands
    or any metal art - $350
    March 13 and 14
    April 10 and 11
    details
  • Sandcarving Glass Class
    for Glass Fusing or
    Any Etch Art - $350
    June 4, 5 & 6
    details
  • Glass Beadmaking
    Beadmaking with a Torch
    Learn to make beads! - $265
    June 19 & 20
    details

 




 


Copyright & ™ 2008 Sundance Art Glass. All rights reserved.
Sundance Art Glass, 6052 Foster Rd., Paradise, CA, 95969-3121, USA
Phone: 800-946-8452  |  Phone: 530-872-3021  |  Fax: 530.876.8561