Order Now
Carlisle Torches
for Glass Lamp workers, Bead makers,
Flame workers, Glassblowers and Marble makers
All varieties are
Pre Mix Center fire with a Surface Mix outer burner
This is our new industrial Quality Double Marvering Pad and Heat Shield Mount.
Order Part Number CTM01 with Heat Shield
$128.00
Order Part Number CTM03 without Heat Shield
$89.00
| Order# | Description | Price |
|
IN STOCK - Ready to Ship CC - Ball & Post Mount - With #3 Center Fire - 2 Inlet Item #63BP3 |
$1376
|
|
|
IN STOCK - Ready to Ship CC - Ball & Post Mount - With #3 Center Fire - 4 Inlet for foot peddle Item #63BP4 |
$1376
|
|
| CC -
Ball & Post
Mount - With #5 Center Fire - 2 Inlet If your are not sure which center fire to order, choose the #5 Item #65BP2 |
$1376
|
|
|
CC - Ball & Post
Mount - With #5 Center Fire - 4 Inlet for foot peddle If your are not sure which center fire to order, choose the #5 Item #65BP4 |
$1376
|
|
| 63RP2 |
IN STOCK - Ready to Ship CC - Rack & Pinion Mount - With #3 Center Fire - 2 Inlet |
$1555
|
| 63RP4 |
IN STOCK - Ready to Ship CC - Rack & Pinion Mount - With #3 Center Fire - 4 Inlet for foot peddle |
$1555
|
| 65RP2 | CC -
Rack & Pinion Mount - With #5 Center Fire - 2
Inlet If your are not sure which center fire to order, choose the #5 |
$1555
|
| 65RP4 | CC -
Rack & Pinion Mount - With #5 Center Fire - 4
Inlet for foot peddle If your are not sure which center fire to order, choose the #5 |
$1555
|
|
The Carlisle CC has four inlets which allow you to add a foot peddle. If you are not ready to use a foot peddle then you will need these parts to plumb your inlets to the two hoses coming from your gas tanks. | $60 |
| 9711 | Torch Mounted Marvering Pad |
$39
|
You need the following equipment to use this torch:
|
Style
The Carlisle CC is known as a cannon style burner. Their large outer case and tremendous flame output resembles the profile of a "cannon". The CC burner is capable of producing 276,100 BTU/hr at 5 P.S.I. natural gas and 10 P.S.I. oxygen.
Flame Characteristics
The Carlisle CC produce two distinctive flames, the center fire (pre-mixed) and the outer fire (surface mixed). The center fire, which has characteristics of a single ported tip, produces a pre-mixed flame similar to what may be achieved with a Carlisle hand torch. This center fire tip is standard with piloting. Depending on the fuel gases used, the center fire is available without piloting. Natural gas and propane use a piloted center fire tip, while an unpiloted tip must be used with hydrogen. The surface mixed outer fire consists of a set of stainless steel tubes that make up a matrix around the center fire. There are two concentric rings of tubes developing the outer fire of the CC burner.
Construction
The outer shell of the CC series body is manufactured from brass (SS optional). The brass shell is threaded onto a bronze machined casting, which represents the mixer body. For fuel gas supply, four metering valves are attached to the back of the mixer body. These valves are color coded for ease of use. The oxygen valves have a green handle while the gas valves have red handles. These valves are standard interconnected by crossover attachments to limit the feed hose requirements to two. The CC series is also available with four separate inlets to allow for the use of foot controllers. The standard connection type for this configuration is hose adapters. Other connection types are available such as welding hose and JIC connections. These connection types are explained further in the options and accessories section.
Mounting
The CC series can accept and interchange several different styles of base attachments. The standard style is a Ball & Post mount. The Ball & Post utilizes the horseshoe shaped cast iron base with a ball and socket connection. The post that extends upward is threaded directly into the bottom of the CC mixer body. This style offers a selective articulation. In order to adjust the angle of the head, the user must manually release a thumb screw in the cast iron base. This provides positive burner positioning. The Rack & Pinion style mount utilizes a pinion gear to pivot the burner in an arc. This style offers greater range in positioning than the Ball & Post mount. The user can adjust a knob on the side of the mounting device for quick, accurate positioning. Custom lathe mounts are also available as an option.
Heat Exchanger
The Heat Exchanger is standard with any CC series burner. Manufactured from aluminum, the Heat Exchanger dissipates heat from the burner body. The Heat Exchanger has cooling fins providing increased surface area for the transfer of heat. This keeps the burner cool during operation. Some applications with high radiant heat transfer, will find our water cooling option desirable.
Gas Equipment
for lampworkers, Glass Beadmakers and Glassblowers
Click Here to see our Oxygen Concentrators (Oxygen Generators)
Gas Regulators
Two regulators are required when you use a two gas, (oxygen and propane) torch. They fit between the gas tanks and the gas hose. None are needed if you are using the Hot Head torch. Oxygen Regulator is not needed if you are using an Oxygen Concentrator.| Item# | Description | Price |
|
OXYGEN REGULATOR Two gauge. One Stage - Click Here for information about regulators, about OUR regulators and warranty. Inlet CGA 540. Outlet male "B" fitting. Order Number REB93 | List Price: $85 Buy One Pay$73.00 Each Buy Two Pay $69.35 Each Buy Four Pay $65.70 Each Buy Eight Pay $62.05 Each
Qty:
|
|
FUEL GAS REGULATOR - Propane, Propylene, or Acetylene Two gauge. One Stage - Click here for information about regulators, about OUR regulators and warranty. Inlet CGA 510. Outlet male "B" fitting. Order Number REB11 | List Price: $85 Buy One Pay$73.00 Each Buy Two Pay $69.35 Each Buy Four Pay $65.70 Each Buy Eight Pay $62.05 Each
Qty:
|
| Item# | Description | Price |
|
OXYGEN REGULATOR Two gauge. Two Stage - Click Here for information about regulators, about OUR regulators and warranty. Inlet CGA 540. Outlet male "B" fitting. Order Number 35125540 | Price: $195.00 |
|
FUEL GAS REGULATOR - Propane, Propylene, or Acetylene Two gauge. Two Stage - Click here for information about regulators, about OUR regulators and warranty. Inlet CGA 510. Outlet male "B" fitting. Order Number 3515510 | Price: $195.00 |
Gas Hoses
Use this
hose when you use a two gas torch (oxygen and propane) like a Minor Burner.
To attach torch, push the cut ends onto the torch and secure with a hose clamp. These
hoses have two attached hoses, one for oxygen and one for propane. The brass end
of the hoses are attached to the gas regulators. Propane hose fittings are left handed threads and colored red and oxygen is right handed
and colored green - This prevents a mix-up when attaching hoses. CAUTION Do not use the easy to find oxygen/acetylene type hoses. The propane gas will rot them. The hoses we sell are made for all types of gas including propane. Hose ends have female brass fittings.
| Item# | Length | Ends of hose - hose diameter | Price |
| T124 | 12 ft (3.7 meters) | Female "B" fitting one side and cut end of hose other side 1/4" diameter hose |
$22
|
| T254 | 25 ft (7.7 meters) |
Female "B" fitting on both ends 1/4" diameter hose |
$34
|
The below larger diameter hose is only used if when you need a large hose to fit over the large inlet fittings on some torches. (You can get the smaller 1/4" hose listed above on these large inlet fittings with a bit of effort. A trick is to immerse the end of the hose in very hot water to soften the end.)
Order # |
Length | Ends of hose - hose diameter | Price |
| T128 | 12 ft (3.7 meters) | Female "B" fitting one side and cut end of hose other side 3/8" diameter hose |
$29.50
|
| T258 | 25 ft (7.7 meters) | Female "B" fitting on both ends 3/8" diameter hose |
$52.00
|
Y - Connectors for Hose
Y Connector -
Connect this fitting at the output of the regulator and attach two hoses so you can use two torches from the same tank.
Oxygen and propane Y are packaged and priced separately.Y Connector with valves - Same as the Y connector described above except has two on/off valves, one for each hose.
| Item# | Description | Output end is a | Input end is a | Price |
| 101 | Y hose connector (oxygen) | hose (B fitting) | Oxygen regulator | $19.50
|
| 102 | Y hose connector (propane) | hose fitting) (B | Propane regulator | $19.50
|
| 111V | Y hose connector with valve (Oxygen) | hose (B fitting) | Oxygen regulator | $32.50
|
| 112V | Y hose connector with valve (Propane) | hose (B fitting) | Propane regulator | $32.50
|
* The FA30 connects between the regulator and the gas hose and is more commonly used.
Flashback Arrestors
In some rare situations, a flame can travel back down a hose to the gas tank and cause an explosion.
This device helps prevent this reverse gas flow and flashback by using a reverse flow check valve and a flame arrestor.
Packaged and priced with both an oxygen and a propane arrestor.
| Item# | Description | Output End | Input End | Price |
 |
Flashback Arrestors (pair of oxygen and fuel gas) Connects directly to the regulator. This arrestor is the easiest to connect and the most popular. Item #FA30 |
Male B size gas hose fitting | Female B size gas hose fitting | $54.00
|
 |
Flashback Arrestors (pair of oxygen and fuel gas) Connects directly to the fittings on a torch like the 3AB, 8M and Carlisle. We also include the fitting so you can put this arrestor in the middle of your twin hose. You may also need the A2 fittings listed below. Item #FA10 |
Female B size hose fitting Male B size fitting using the included adaptor |
Male B size hose fitting | $54.00
|
 |
1/4" Barbed Hose Fittings for Torch For use with torches that have B (screw on) fittings to accomodate cut-end hoses. Insert barbed fitting into cut end of hose and secure with included hose clamp. Be sure to check for leaks. Item #A2 |
One side Female B size hose fitting | Other side a barb that fits in a 1/4" gas hose - use a hose clamp | $5.00
|
 |
3/8" Barbed Hose Fittings for Torch For use with torches that have B (screw on) fittings to accomodate cut-end hoses. Insert barbed fitting into cut end of hose and secure with included hose clamp. Be sure to check for leaks. Item #A3 |
One side Female B size hose fitting | Other side a barb that fits in a 3/8" gas hose - use a hose clamp | $5.00
|
 |
Oxygen and Fuel Gas Fittings Allows you to connect a hose to another hose to make a longer hose (hoses need B size fittings) Item #A30 (Oxygen) Item #A31 (Fuel) |
Male B size gas hose fitting | Male B size gas hose fitting | A30 $1.50
A31 $1.50 ea
|
Note: Flashback arrestors have an arrow stamped on it to indicate the gas flow direction.
Works in only one direction.
A2 optional,
not always need and are not included.* The FA30 connects between the regulator and the gas hose and is more commonly used. Requires B size fittings on hose.
ALL IN ONE - 4 in 1
Combination Flashback Arrestor and Quick-Connect - Item# QDF30 - $89.00
Four Functions in a single item. Shorter and less expensive than if purchased separately.
|
Hose Quick Connects
Makes an easy job out of disconnecting and reconnecting your torch.Disconnect your torch switching to a different torch or to put it away for safe keeping.
Great for quick classroom set up and take down.
| Item# | Description | Input end is a | Output end is a | Price |
| QDB10 | Quick Connects (pair) | Male B gas hose fitting | Female B fitting | $49
|
| QDB20 | Quick Connects (pair) | Hose to Hose | Hose to Hose | $49
|
| QDB30 | Quick Connects (pair) | Regulator | Male B hose fitting | $49
|
Manifold Gas System
Connect up to six torches to the same gas supply with this manifold system. Included are enough fittings and plugs to make 2 to 6 hose connections. Two manifolds are required, one for oxygen and one for propane. All Brass.
Custom Manifold Systems:
We can help you figure out which parts you would need for your system and pre assemble for no extra charge. Systems might also include quick connects and flashback arrestors.
| Item# | Description | Price |
| M6 | Manifolds system, Includes 1 block, 7 fittings and 4 plugs - two required - specify Oxygen or Propane | $57.50
|
| Item# | Description | Price |
| MB7 | Manifold block only, works with oxygen or gas | $39.00
|
| 32 | Extra Fitting - one side fits in the manifold block, other side fits a standard right handed thread oxygen "B" size hose fitting. | $1.50
|
| 33 | Extra Fitting - one side fits in the manifold block, other side fits a standard left handed thread gas "B" size hose fitting. Gas fittings have a "line notch" stamped into the nut part of the fitting to identify it as left handed threading. | $1.50
|
| P41P | Extra Plug - plugs unused outlets in the manifold block | $2.00
|
Manifold setup for 3 torches.Bulk Adaptor Systems
For users of Hot Head Torches or any torches similar to the HotHead torchSave on the cost of propane by using a large bulk refillable propane tank instead of the small disposable fuel gas cylinders.
Item# F273701 uses a single hose with the correct fittings on each end. 5 or 12 foot hose.
Y-Propane F271735 - Connect two torches with this fitting. This Y fits into a bulk tank - the two other ends fit two F273701 hoses which go to the Hot Head torches.
| Description | Price | |
 |
Bulk adaptor system with 5 foot hose Made in the USA Same item as the 190190 below. OK now you have that choice-Made in USA or China F273701 |
$31 |
 |
Bulk adaptor system with 5 foot hose Made in China Same item as the above F273701 OK now you have that choice-Made in USA or China Buy one Hose $27 Buy 2 or more $24.30 190190 |
$27
Qty:
|
 |
Bulk adaptor system with 12 foot hose Made in the USA F273702 |
$42
|
 |
Bulk adaptor system with 10 foot hose Made in China Same item as the above F273702 but 2' shorter OK now you have that choice-Made in USA or China Buy one Hose $35 Buy 2 or more $31.50 ea. 191191 |
$35
Qty:
|
 |
Y - Propane Fitting Made in USA Connect two torches with this fitting. This Y fits into a bulk tank - the two other ends fit two of the above hoses which go to the Hot Head torches. |
$32
Temporarily Out of Stock
|
Spark Lighter
Use to light torches. Squeeze the handles together to cause a spark.| Order# | Description | Price |
| 1501 | Used to light torches. Squeeze the handles together to cause a spark. | $3.00
|
Click here to see our foot pedals
Work Surfaces
for
Torch Lampworking, Glassblowing and
Glass Bead making
Work Surfaces
Protect your work table.
A comfortable pair of padded foam armrests
and work surface and rod rest all in one! All stainless steel.
Pictured with a Minor Burner not included.
Dimensions are usually close but can vary a bit - plus or minus a 1/2" or so.
| Size | Description | Price | |
 |
#1617 12"x 13" |
Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. | $16
|
|
#1636 17" x 18" |
Stainless Steel Work Surface - 17" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. | $29
|
|
#1638 16" x 24" |
Stainless Steel Work Surface - 16" x 24" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods. May need to be sent in it's own box. | $38
|
|
#1644 13" x 18" |
Stainless Steel Work Surface - 13" x 18" flat area, heavy thick metal. Actually a bit smaller so we can fit it in a standard box. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 18" long rest for your colored glass rods. May need to be sent in it's own box. | $24 |
 |
#1659 16"x 30" |
Stainless Steel work surface - actually 16" x 30" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 30" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box. | $49 |
Accessories pictured not included.
Glass Rod RestsThis movable rod rest is used to support glass rods to keep them up off the flame worker's workbench for easier grabbing, better organization, and to keep the glass rods cleaner. The rippled edge keeps the rods from rolling around. These durable stainless steel rod holders can also be placed inside a glass bead kiln to support your mandrels.
| Item# | Description | Price |
 |
#RRT8 - 8" Rod rest - fits inside 9" kilns or on your workbench
Volume Pricing Buy 1 6.00 Buy 2 $5.40 Buy 4 $4.80 Buy 8 $4.20 |
$6.00
Qty:
|
|
|
#RRT9 - 9" Rod rest - fits inside 10" kilns or on your workbench Volume Pricing Buy 1 $7.00 Buy 2 $6.30 Buy 4 $5.60 Buy 8 $4.90 |
$7.00
Qty:
|
 |
#RRT12 - 12" Rod rest - fits inside 13" kilns or on your workbench Volume Pricing Buy 1 $9.00 Buy 2 $8.10 Buy 4 $7.20 Buy 8 $6.30 |
$9.00
Qty:
|
 |
#RRT17 - 17" Rod rest - fits inside 18" kilns or on your workbench Volume Pricing Buy 1 $11.00 Buy 2 $9.90 Buy 4 $8.80 Buy 8 $7.70 |
$11.00
Qty:
|
 |
#RRT8T - 8" Rod Rest Extra Tall for easy Grabbing Volume Pricing Buy 1 $9.00 Buy 2 $8.10 Buy 4 $7.20 Buy 8 $6.30 |
$9.00
Qty:
|
 |
#RRT12T - 12" Rod Rest Extra Tall for easy Grabbing Volume Pricing Buy 1 $12.00 Buy 2 $10.80 Buy 4 $9.60 Buy 8 $8.40 |
$12.00
Qty:
|
 |
#RRT17T - 17" Rod Rest Extra Tall for easy Grabbing Volume Pricing Buy 1 $14.00 Buy 2 $12.60 Buy 4 $11.20 Buy 8 $9.80 |
$14.00
Qty:
|
Difference between standard and tall rod rests.
Looking for something? Torches? Tools? Kilns?
Look in our index. Click on: Sitemap
