Betta Torch
for Glass Lampworkers, Beadmakers, Flameworkers, Glassblowers and Marblemakers
The Betta Burner
by Bethlehem
$389
The Betta Glass Bead Burner
is designed for the glass worker who has a limited supply of
high pressure fuel. The torch's unique LOW PRESSURE requirement
results in unparalleled efficiency. The Betta is a revolutionary
design using larger valves and inner gas channels that provide
maximum fuel at minimum pressure while still producing a very hot flame. The Betta burner melts glass with pressures as low as .2 psi gas and 5 psi oxygen.
Do you work at home with low pressure household natural gas?
For you, the Betta is a dream-come true! It is the only torch
on the market today designed with your needs in mind. Think of
the money you can save on fuels and oxygen! And yet there is
no sacrifice in performance. The Betta will melt both soft and
borosilicate glass with ease. The torch can also be used at the
traditional flame settings of 5 psi gas and 20 psi oxygen when
available. It works equally well with propane and other fuels.
The Betta is the new bead burner!
Specifications:
- Burner configuration:
- Center fire – 6 jets
- Pentagon shape
- Face dia. - 5/8" (16.0mm)
- Flame width:
- Low pressure:
1.2 psi gas / 3.0 psi oxygen. width: 0.75" x 10" long - Max pressure:
5.0 psi gas / 20 psi oxygen
width: 2.5" x 16" long
- Low pressure:
- Full flame gas consumption: 4.4 cu. ft./hr (107.4 l/hr); oxygen: 11.7 cu. ft./hr. (332.3 l/hr)
- Works:
- All sized Soft Glass - Sodalime Glass
- Borosilicate Rod - 5/8 " (16mm)
- Borosilicate Tube - 19mm
- Dimensions: 5” manifold with a 6” base
- Net Weight: 3.3 lbs.
You need the following equipment to use this torch:
|
This Betta Burner torch is a surface mix torch.
Gas Regulators
|
Order # |
Gas | Description | Price |
| REB93 | Oxygen | Two gauge. One Stage - Click Here for warranty. Inlet CGA 540. Outlet male "B" fitting | $69 |
| REB11 | Propane | Two gauge. One Stage - Click here for an important choice you need to make - Click here for warranty. Inlet CGA 510. Outlet male "B" fitting | $69 |
| 260 | Propane | Two gauge. Two Stage - eliminates vapor problems | $265 |
Gas Hoses
Use this gas hose when you use a two gas torch (oxygen and propane) like a Minor Burner. Most torches are attached to the hose by pushing the cut end (no brass fitting) on to the torch and securing with a hose clamp. These hoses have two attached hoses, one for oxygen and one for propane. The end of the hoses are attached to the gas regulators. Propane hose fittings are always left handed threads and oxygen is right handed so there is never a mixup attaching hoses. The green hose is oxygen and propane is red. CAUTION Do not use the easy to find oxygen/acetylene type hoses. The propane gas will rot them. The hoses we sell are made for all types of gas including propane. All hose endings have brass fittings and are female. The fastest way to order any of these items is to call us toll free at 1-888-4HOTGLASS.
|
Order # |
Length | Ends of hose - hose diameter | Price |
| T124 |
|
Female "B" fitting one side and cut end of hose other side - 1/4" diameter hose | $22 |
| T254 |
|
Female "B" fitting on both ends - 1/4" diameter hose | $34 |
The below larger diameter hose is only used if when you need a large hose to fit over the large inlet fittings on some torches. (You can get the smaller 1/4" hose listed above on these large inlet fittings with a bit of effort. A trick is to emerse the end of the hose in very hot water to soften the end.)
|
Order # |
Length | Ends of hose - hose diameter | Price |
| T128 |
|
Female "B" fitting one side and cut end of hose other side - 3/8" diameter hose | $22 |
| T258 |
|
Female "B" fitting on both ends - 3/8" diameter hose | $34 |
Y - Connectors for Hose
Y Connector - Connect this fitting at the output
of the regulator and attach two hoses so you can use two torches
from the same tank. Oxygen and propane Y are packaged and priced
separately.
Y Connector with valves - Same as the Y connector described
above except has two on/off valves, one for each hose.
| Order # | Description | Output end is a | Input end is a | Price |
| 101 | Y hose connector (oxygen) | hose (B fitting) | Oxygen regulator | $19.50 |
| 102 | Y hose connector (propane) | hose (B fitting) | Propane regulator | $19.50 |
| 101V | Y hose connector with valve (Oxygen) | hose (B fitting) | Oxygen regulator | $32.50 |
| 102V | Y hose connector with valve (Propane) | hose (B fitting) | Propane regulator | $32.50 |
* The FA30 connects between the regulator and the gas hose and is more commonly used.
Flashback Arrestors
Flashback Arrestors - In some rare situations, a flame can
travel back down a hose to the gas tank and cause an explosion.
This device helps prevent this reverse gas flow and flashback.
This device uses a reverse flow check valve and a flame arrestor
that stops this flashback flame. Packaged and priced with both
an oxygen and a propane arrestor.
A2
is optional, not included.
| Order # | Description | Output end is a | Input end is a | List Price |
| FA10 | Flashback arrestors (pair of oxygen and fuel gas) Connects directly to the fittings on a torch like the 3AB, 8M and Carlisle. We also include the fitting so you can put this arrestor in the middle of your twin hose. A good place to put this arrestor is a couple feet away from the torch. If you cut the hose you will not have fittings on the ends. Then must order one or two pair of A2 fittings for $5 to connect to arrestor. |
Female B size hose fitting Male B size fitting using the included adaptor |
Male B size hose fitting | $54 |
| FA30 | Flashback arrestors (pair of oxygen and fuel gas) Connects directly on the regulator. | male B size gas hose fitting | Female B size gas hose fitting | $54 |
| A2 | Insert into cut end of hose and secure with hose clamp. Check for leaks. | One side Female B size hose fitting | Other side a barb that fits in a 1/4" ID gas hose - use a hose clamp | $5 |
|
A30 ox A31 fuel |
Oxygen and Fuel Gas Fittings - The pieces in the picture labled "included". A pair of these are included in the FA10. If you need extra pieces order the A30 and A31 parts. | male B size gas hose fitting | male B size gas hose fitting | $1.50 each |
Note: Flashback arrestors have an arrow
stamped on it to indicate the gas flow direction. Works in only
one direction.
* The FA30 connects between the
regulator and the gas hose and is more commonly used. Requires
B size fittings on hose.
ALL IN ONE - Combination
Flashback Arrestor and Quick-Connect - Order Number QDF30 - $79
Four Functions in a single item. Shorter and less expensive than if purchased separately.
|
Hose Quick Connects
Disconnect your torch easily and quickly
for switching to a different torch or to put it away for safe
keeping or great for quick classroom set up and take down.
| Order # | Description | Input end is a | Output end is a | Price |
| QDB10 | Quick Connects (pair) | Male B gas hose fitting | Female B fitting | $49 |
| QDB20 | Quick Connects (pair) | Hose to Hose | Hose to Hose | $49 |
| QDB30 | Quick Connects (pair) | Regulator | Male B hose fitting | $49 |
Manifold Gas SystemConnect up to six torches to the same gas supply with this manifold system. Included are enough fittings and plugs to make 2 to 6 hose connections. Two manifolds are required, one for oxygen and one for propane. All Brass.
Custom Manifold Systems: We can help you figure out which parts you would need for your system and pre assemble for no extra charge. Systems might also include quick connects and flashback arrestors. Place an order.
| Order # | Description | Price |
| M6 | Manifolds system, Includes 1 block, 7 fittings and 4 plugs - two required - specify Oxygen or Propane | $57.50 |
| Order # | Description | Price |
| MB7 | Manifold block only, works with oxygen or gas | $39 |
| 32 | Extra Fitting - one side fits in the manifold block, other side fits a standard right handed thread oxygen "B" size hose fitting. | $1.50 |
| 33 | Extra Fitting - one side fits in the manifold block, other side fits a standard left handed thread gas "B" size hose fitting. Gas fittings have a "line notch" stamped into the nut part of the fitting to identify it as left handed threading. | $1.50 |
| P41P | Extra Plug - plugs unused outlets in the manifold block | $2 |
Example Manifold setup for 3 torches.
Bulk
Adaptor Systems
For users of Hot Head Torches or any torches similar to the HotHead torch. Save on the cost of propane by using a large bulk refillable propane tank instead of the small disposable fuel gas cylinders. Order No. F273701, uses a single hose with the correct fittings on each end. 5 or 12 foot hose.
Y-Propane F271735
Connect two torches with this fitting. This Y fits
into a bulk tank - the two other ends fit two F273701 hoses which
go to the Hot Head torches.
|
Order # |
Description | Price |
| F273701 | Bulk adaptor system - 5 Feet | $27 |
| F273710 | Bulk adaptor system - 12 Feet | $42 |
| F271735 | Y-Propane Fitting | $32 |
Spark Lighter
Use to light torches. Squeeze the handles together to cause a spark. Place an order.
| Retail | ||
| 1501 |
Sparklighter Use to light torches. Squeeze the handles together to cause a spark. |
$2 |
Propane Bottle Holder with work surface
All stainless steel. Holds your propane bottle safely and at the correct angle for your torch. Torch and propane tank not included. We recommend the HotHead torch. Includes a built in tool and glass rod rest. Holder holds both the wide and narrow shaped gas tank. Should be clamped or screwed to the table.
| Order # | Description | Price |
| 1618 | Propane / Mapp bottle holder and work surface 8" x 10" | $20 |
| 1620 | Propane / Mapp bottle holder and work surface 10-1/2" x 16" | $28 |
Work Surfaces
Protect your work table
A comfortable pair of padded foam armrests
and worksurface and rodrest all in one! All stainless steel.
Pictured with a Minor Burner not included.
| No. | Size |
Description |
List Price | |
| 1631 | 9"x 11" | Stainless Steel Work Surface - 9" x 11" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 9" long rest for your colored glass rods. Made in the USA | $12 | |
 |
1617 | 12" x 13" | Stainless Steel Work Surface - 12" x 13" flat area, heavy .030" thick metal. One edge is bent so you can wrap it over the edge of your work bench. The far edge is also bent up right so you have a nice 13" long rest for your colored glass rods. Made in the USA | $16 |
 |
1633 | 13" x 24" | Stainless Steel work surface - 13" x 24" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 24" long rest for your colored glass rods. No boxing fee. Made in the USA | $29 |
 |
1635 | 14" x 23" | Stainless Steel work surface - 14" x 23" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 14" long rest for your colored glass rods. No boxing fee. Made in the USA | $29 |
 |
1639 | 22.5"x 28" | Stainless Steel work surface - actually 22.5" x 28.5" flat area, heavy thick metal. Front edge is bent so it fits nicely over the edge of your work table. The far edge is also bent up right so you have a nice 28" long rest for your colored glass rods. PLUS if this is shipped, it must go in it's own box plus add a $4 boxing fee. Made in the USA | $45 |
| 1641 | 20"x 28" | Stainless Steel work surface - with Arm rests and built on rod rest - 20" x 30" flat area - see picture above - PLUS if this is shipped, it must go in it's own box plus add a $4 boxing fee. Made in the USA | $65 |
Glass Rod
Rests This movable rod rest is used
to support glass rods to keep them up off the flameworker's workbench
for easier grabbing, better organization, and to keep the glass
rods cleaner. The rippled edge keeps the rods from rolling around.
These durable stainless steel rod holders can also be placed
inside a glass bead kiln to support your mandrels. Made in the USA
| Order # |
Description |
Price |
| RRT8 | 8" Rod rest - fits inside 9" kilns or on your workbench | $5 |
| RRT9 | 9" Rod rest - fits inside 10" kilns or on your workbench | $6 |
| RRT17 | 16" Rod rest - fits inside 18" kilns or on your workbench | $11 |
Look in our index. Click on: Supplies.
Order Now
Catalogs
